پیژندنه
This manual provides detailed instructions for the installation, operation, and maintenance of your AIDA Single Pole Motion Sensor Light Switch. This device is designed to enhance convenience and energy efficiency by automatically controlling lighting based on occupancy. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Image: The AIDA Single Pole Motion Sensor Light Switch shown alongside its product packaging, highlighting its design and key features.
د خوندیتوب مهم معلومات
خبرداری: د بریښنایی شاک خطر. ناسم نصب کول خطرناک یا غیرقانوني کیدی شي. که تاسو د نصب کولو پروسې د کومې برخې په اړه ډاډه نه یاست نو تل د وړ بریښنایی متخصص سره مشوره وکړئ.
- بریښنا بند کړئ: Always disconnect power at the circuit breaker or fuse box before installing or servicing the switch.
- بې طرفه تار ته اړتیا ده: This device requires a neutral wire for proper operation. If your electrical box does not have a neutral wire, this switch is not compatible.
- Single Pole Only: This switch is designed for single-pole control only and is not suitable for 3-way or multiple-way circuits.
- UL/CUL Certified: The switch is UL and CUL listed, ensuring compliance with safety standards.
- د عملیاتو Voltage: Ensure your electrical system operates at 120 Volts (AC).
د بسته محتويات
د نصبولو پیل کولو دمخه ډاډ ترلاسه کړئ چې ټولې برخې شتون لري:
- AIDA Single Pole Occupancy Motion Sensor Light Switch
- بې رنګه دیوال پلیټ
- Wire Nuts (Terminal caps)
- د سکرو نصب کول
- د لارښود لارښود (دا سند)
د محصول مشخصات
| فیچر | تفصیل |
|---|---|
| د ننوتلو درجه بندي | 120/277V~50/60Hz |
| Applicable Load Types | 200W LED/CFL, 500W MLV, 500W INC/HAL, 5A Ballast (120V), 1/6HP Fan (4.4A 120V) |
| د سویچ ډول | واحد قطب |
| سیم ګیج | #14 - #12 AWG |
| د تارونو ډول | ترمینل کیپ |
| د عملیاتي حرارت درجه | له 32°F څخه تر 104°F (0°C څخه تر 40°C) |
| د محصول اندازه | 4.17"x1.73"x1.77" (106x44x45mm) |
| مواد | Copper, Brass (Contact Material) |
| د کنټرول طریقه | Sensor, Touch |
Image: A visual representation of the product dimensions and a detailed table of specifications for the AIDA motion sensor switch.
Image: A chart illustrating the universal compatibility of the AIDA motion sensor switch with various load types including LED/CFL, MLV, INV/HAL, Ballast, and Fan.
تنظیم او نصب کول
مخکې له دې چې تاسو پیل کړئ:
- بریښنا بند کړئ: د خپل سرکټ بریکر پینل ومومئ او د هغه سویچ بکس بریښنا بنده کړئ چې تاسو به پرې کار کوئ. د حجم په کارولو سره تایید کړئ چې بریښنا بنده دهtage ټیسټر.
- د تارونو پیژندنه: Carefully remove the existing wall plate and switch. Identify the following wires:
- Line Wire (Black): د سرکټ بریکر څخه بریښنا لیږدوي.
- Load Wire (Black): د رڼا فکسچر ته بریښنا لیږدوي.
- بې طرفه تار (سپین): Required for this switch.
- ځمکنی تار (شنه یا بې مس): For safety.
- Confirm Neutral Wire: This switch requires a neutral wire. If you do not have a neutral wire (typically white) in your electrical box, this switch is not compatible.
د تار لګولو لارښوونې:
Follow the wiring diagram carefully. Use the provided wire nuts to secure connections.
Image: A detailed wiring diagram showing connections for the AIDA motion sensor light switch, including Line, Load, Neutral, and Ground wires. It explicitly states that a neutral wire is required and the switch is not suitable for 3-way or multiple-way circuits.
- سره وصل کړئ شین wire from the switch to your house's ځمكه تار
- سره وصل کړئ سپین wire from the switch to your house's بې طرفه تار
- سره وصل کړئ تور wire from the switch to your house's لاین (ګرم) تار.
- سره وصل کړئ سور wire from the switch to your house's لوډ wire (to the light fixture).
Important: Ensure all connections are secure and insulated with wire nuts. This switch is for single-pole applications only. Do not use in 3-way or multi-way circuits.
د سویچ نصب کول:
- Carefully fold the wires and push the switch into the electrical box.
- Secure the switch to the electrical box using the provided screws.
- Attach the screwless wall plate.
- په سرکټ بریکر کې بریښنا بحال کړئ.
Image: A diagram showing the precise dimensions of the AIDA motion sensor light switch, its mounting bracket, and the screwless wall plate for easy installation.
Operating Instructions and Customization
The AIDA motion sensor switch offers various modes and adjustable settings to suit your needs.
د عملیاتو طریقې:
- Occupancy Mode (Auto-On/Auto-Off): Lights automatically turn ON when motion is detected and OFF after a set delay when no motion is detected. Ideal for high-traffic areas like bathrooms, laundry rooms, and kitchens.
- Vacancy Mode (Manual-On/Auto-Off): Lights must be manually turned ON, but will automatically turn OFF after a set delay when no motion is detected. Suitable for bedrooms or TV rooms where you prefer manual control for turning on lights.
د تنظیم وړ ترتیبات:
The switch features internal dip switches for customizing settings. Carefully remove the faceplate to access these controls.
انځور: نږدې انځور view of the AIDA motion sensor switch's internal settings, showing dip switches for Adjustable Light Level (Timeout), PIR Sensitivity, and Ambient Light Sensor Mode.
- Adjustable Light Level (Timeout): This setting determines how long the light stays on after the last detected motion. Options typically include 30 seconds, 1 minute, 5 minutes, 15 minutes, or 30 minutes. Refer to the switch's internal labels for specific settings.
- د پیر حساسیت: Adjusts the sensitivity of the Passive Infrared (PIR) sensor to detect motion. Settings range from Low (L) to High (H). A higher sensitivity detects smaller movements or movements at a greater distance.
- Ambient Light Sensor Mode: Controls how the switch reacts to ambient light.
- ټیټ/لوړ: The switch will only turn on lights if the ambient light level is below a certain threshold (e.g., only turn on at night).
- بند: The ambient light sensor is disabled, and the switch will turn on lights regardless of ambient light.
- دود: Allows for more specific ambient light level adjustments.
Note: After adjusting any internal settings, reattach the faceplate securely.
انځور: یو مفصل view of the AIDA motion sensor switch with its cover removed, showing the dip switches for adjusting timeout, PIR sensitivity, and ambient light sensor mode.
ساتنه
The AIDA Motion Sensor Light Switch is designed for long-lasting, maintenance-free operation. To ensure optimal performance:
- پاکول: Periodically wipe the switch and wall plate with a soft, damp ټوکر. د کثافاتو پاکوونکي یا محلولونه مه کاروئ، ځکه چې دا کولی شي پای یا داخلي برخو ته زیان ورسوي.
- خنډ: Ensure the sensor lens is not obstructed by furniture, decorations, or other objects, as this can impair motion detection.
- د کارونکي د خدمت وړ برخې نشته: There are no user-serviceable parts inside the switch. Do not attempt to open or repair the unit beyond adjusting the dip switches.
د ستونزو حل کول
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| Light does not turn ON with motion. |
|
|
| Light stays ON constantly. |
|
|
| Light turns OFF too quickly or too slowly. |
|
|
| Switch makes a clicking noise. |
|
|
تضمین او د پیرودونکي ملاتړ
AIDA products are manufactured to high-quality standards and are backed by a limited warranty. For specific warranty details, please refer to the warranty card included with your purchase or visit the official AIDA webسایټ
If you encounter any issues or have questions regarding your AIDA Single Pole Motion Sensor Light Switch, please contact our customer support team:
- Webسایټ: Visit the AIDA Store on Amazon (د عمومي محصول معلوماتو لپاره)
- بریښنالیک: د محصول بسته بندۍ یا رسمي ته مراجعه وکړئ webد اړیکې بریښنالیک لپاره سایټ.
- تلیفون: د محصول بسته بندۍ یا رسمي ته مراجعه وکړئ webد اړیکې د تلیفون شمېرې لپاره سایټ.
Please have your model number (B0DM4SGNBQ) and purchase date ready when contacting support.
