پیژندنه
This instruction manual provides essential information for the proper setup and operation of your GODIYMODULES 15-48V Phantom Power Electret Condenser Microphone Amplifier Board. This board is designed to amplify electret microphones, enabling their use with 15-48V phantom power sources for various audio applications.
ځانګړتیاوې
- Designed for 15-48V phantom power operation.
- Compatible with universal and single-point electret microphones.
- Suitable for applications such as karaoke, recording, and conference speech.
- Optimized for low noise performance when paired with a low-noise electret microphone.
مشخصات
| پیرامیټر | ارزښت |
|---|---|
| د مایکروفون ډول | بریښنایی مایکروفون |
| د بریښنا رسول | 15-48V Phantom Power |
| د محصول خنډ | 250 اوهم |
| د غږ فشار کچه (SPL) | 125 dB |
| د سیګنال څخه تر اواز تناسب (SNR) | 60 dB |
| د کار روان | نږدې 3.2 mA |
| د بورډ اندازه | 45mm x 15.82mm (excluding cannon head part) |
| د توکي وزن | 1.06 اونس |
| د کڅوړې ابعاد | 3.94 x 1.97 x 0.79 انچه |
د بسته محتويات
- 1 x Electret Condenser Microphone Ampلوړ بورډ
تنظیم او پیوستون
دا amplifier board requires an electret microphone and a phantom power source (15-48V) for operation. The board converts the phantom power into the necessary bias voltage for the electret microphone and amplifies its signal.
- Connect the Electret Microphone: Solder or connect your electret microphone to the designated 'MIC +' and 'MIC -' pads on the amplifier board. Ensure correct polarity.
- Connect to Phantom Power Source: The output pins of the amplifier board are designed to connect to an XLR input that provides 15-48V phantom power. This connection will supply power to the board and the microphone, and carry the ampغږ شوی آډیو سیګنال.
- د آډیو تجهیزاتو سره وصل شئ: The XLR output from your phantom power source (or directly from the board if integrated) should then be connected to your mixer, audio interface, or other recording/sound equipment.
مهم: The overall noise performance of the system is significantly influenced by the quality of the electret microphone used. For optimal results, it is recommended to use a low-noise electret microphone.
عملیات
Once properly connected, the amplifier board operates automatically when phantom power is supplied. It boosts the low-level signal from the electret microphone to a line-level signal suitable for professional audio equipment.
- ډاډ ترلاسه کړئ چې ټولې اړیکې د بریښنا پلي کولو دمخه خوندي دي.
- Activate the phantom power on your mixer or audio interface.
- Monitor audio levels on your connected equipment to prevent clipping or distortion. Adjust gain settings on your mixer/interface as needed.
ساتنه
د amplifier board requires minimal maintenance. Keep the board clean and free from dust and moisture. Avoid exposing it to extreme temperatures or direct sunlight. Do not attempt to disassemble the board beyond necessary connections, as this may void any potential warranty.
د ستونزو حل کول
- د غږ محصول نشته:
- Verify that phantom power (15-48V) is active on your connected audio equipment.
- د مناسب ناستې او دوام لپاره د کیبل ټولې اړیکې وګورئ.
- Ensure the electret microphone is correctly wired to the board with correct polarity.
- Test with a different electret microphone or cable if available.
- ډېر شور/غوغا:
- د ټولو آډیو تجهیزاتو مناسب ځمکنۍ کولو ډاډ ترلاسه کړئ.
- Use shielded cables for all connections.
- Verify that the electret microphone itself is low-noise.
- د نږدې بریښنایی وسایلو لپاره وګورئ چې ممکن د مداخلې لامل شي.
- د ټیټې کچې تولید:
- Confirm that the phantom power voltage د 15-48V حد کې دی.
- Adjust the gain settings on your mixer or audio interface.
بصری مرستې
د محصول ویډیو
ویډیو 1: دا ویډیو یو بصري کتنه وړاندې کويview of the Electret Microphone Amplifier Boards, showing their packaging and physical appearance. It demonstrates the compact size and how the electret microphone capsule connects to the board.
تضمین او ملاتړ
For warranty information or technical support, please refer to the seller's policies on the platform where the product was purchased. Keep your purchase receipt as proof of purchase.
