Monport 60W JPT & MOPA Fiber Laser Engraver (Model GM60) User Manual

1. محصول ختم شوview

The Monport 60W JPT & MOPA Fiber Laser Engraver (Model GM60) is a compact and powerful laser marking machine designed for precision engraving and cutting on various materials. It features a JPT MOPA laser source, enabling true color marking and deep engraving capabilities. The system is equipped with a customized galvanometer for high speed and accuracy.

کلیدي ځانګړتیاوې:

• مدغم ډیزاین: Smaller footprint and lighter weight while maintaining high performance.
• High Speed & Accuracy: Max marking speed of 10,000mm/s and carving accuracy of 0.01mm.
• Optimal Marking Area: A 175x175mm marking area is optimized for consistent engraving quality.
• True Color Marking: JPT MOPA laser allows for color marking on stainless steel, brass, and aluminum blackening.
• Deep Engraving & Cutting: Capable of 2.5D and deep metal engraving, and some metal sheet cutting.
• اوږد عمر: Laser source designed for up to 100,000 hours of operation.
• د سافټویر مطابقت: Supports BSLcad and LightBurn.

انځور 1.1: اوورview of the Monport 60W JPT & MOPA Fiber Laser Engraver.

2. د خوندیتوب لارښوونې

Operating a fiber laser engraver involves potential hazards. Adhere to all safety precautions to prevent injury and damage to the equipment. This section outlines general safety practices; always refer to local regulations and specific safety instructions provided with the machine.

عمومي خوندیتوب احتیاطي تدابیر:

• د سترګو ساتنه: Always wear certified laser safety glasses appropriate for the laser's wavelength (1064nm for fiber lasers) when the machine is in operation.
• د پوستکي ساتنه: Avoid direct exposure of skin to the laser beam.
• وینټیلیشن: Ensure adequate ventilation or use a fume extractor to remove fumes and particles generated during engraving, especially when working with materials like leather or certain plastics.
• د اور وژنې خوندیتوب: Keep a fire extinguisher nearby. Do not engrave highly flammable materials without proper precautions.
• بریښنایی خوندیتوب: Ensure the machine is properly grounded and connected to a stable power supply. Do not operate with wet hands or in damp چاپیریالونه
• د کار ساحه: Keep the work area clear of clutter and unauthorized personnel. Consider using a protection enclosure.
• اضطراري تمځای: د بیړني تمځای تڼۍ د موقعیت او عملیاتو سره ځان بلد کړئ.
• د موادو مطابقت: Only engrave materials known to be safe for fiber lasers. Avoid materials that produce toxic fumes or reflect the laser beam dangerously.

3. د بسته محتويات

Upon unpacking, verify that all items listed below are present and undamaged. If any components are missing or damaged, contact Monport customer support immediately.

• GM 60 Fiber Laser Engraver Unit
• د بریښنا کیبل
• USB کیبل
• د لیزر خوندیتوب شیشې
• Focusing Ruler/Gauge
• Software Installation Media (or download instructions)
• د کارونکي لارښود (دا لاسوند)

۴. د تنظیم لارښوونې

4.1 پاکول او ځای پرځای کول

1. د لیزر نقاش او ټول لوازم په احتیاط سره له بسته بندۍ څخه لرې کړئ.
2. Place the engraver on a stable, level surface in a well-ventilated area. Ensure sufficient space around the machine for operation and maintenance.
3. Note the machine's dimensions: approximately 370mm (width) x 300mm (depth) x 550mm (height).

Image 4.1: The Monport 60W Fiber Laser Engraver with approximate dimensions.

۱۳.۳ د ماشین سره نښلول

1. Connect the power cable to the engraver's power input and then to a grounded electrical outlet.
2. Connect the USB cable from the engraver to your computer. If experiencing connectivity issues, try routing the USB through a powered port or using an adapter for USB-C to standard USB.
3. ډاډ ترلاسه کړئ چې ټولې اړیکې خوندي دي.

4.3 د سافټویر نصب کول

The Monport GM60 supports BSLcad and LightBurn software. Refer to the provided software installation guide for detailed instructions.

1. Insert the software installation media or download the latest version of BSLcad or LightBurn from the official Monport webسایټ
2. Follow the on-screen prompts to install the software and necessary drivers.
3. Launch the software and configure the machine settings according to the software's documentation.

5. عملیاتي لارښوونې

۵.۱ د بریښنا فعالول او لومړني چکونه

1. Ensure all safety precautions are in place, including wearing laser safety glasses.
2. Turn on the main power switch on the engraver.
3. Launch the engraving software (BSLcad or LightBurn) on your computer.

۵.۲ د موادو چمتو کول او ځای پر ځای کول

1. Select a suitable material for engraving (e.g., metal, leather, certain plastics).
2. Place the material securely within the 175x175mm marking area on the work platform.
3. Use the red dot pointer and the focusing ruler to set the correct focal distance for your material. Adjust the Z-axis (laser head height) until the red dots converge or the ruler indicates optimal focus.

۵.۲ د نقاشۍ پروسه

1. Design Import: Import or create your design within the engraving software.
2. د پیرامیټر ترتیبات: Adjust laser parameters such as power, speed, frequency, and pulse width based on the material and desired effect. Monport provides reference parameters for various materials and color marking.
3. مخکېview: د سافټویر پری وکاروئview function to ensure the design is correctly positioned on the material.
4. نقاشي پیل کړئ: Initiate the engraving process from the software. Monitor the process closely.

Image 5.1: Illustration of the laser's precision, capable of 0.01mm accuracy.

5.4 Advanced Engraving Techniques

• Color Marking: Utilize the JPT MOPA laser's adjustable frequency (1-4000kHz) and pulse width (2-500ns) to achieve various colors on metals like stainless steel and brass. Experiment with parameters to achieve desired hues.
• Deep Engraving & 2.5D Engraving: For deeper marks or 2.5D effects, adjust power and multiple passes. Higher power generally enhances deep engraving and cutting capabilities.
• Rotary Axis (Optional): If using an optional rotary axis, refer to its specific manual for setup and operation with cylindrical objects.

انځور ۶: پخوانیamples of materials compatible with the Monport fiber laser, including color marking capabilities.

6. ساتنه او پالنه

Regular maintenance ensures optimal performance and extends the lifespan of your Monport fiber laser engraver.

6.1 پاکول

• د عینکو پاکول: The F-theta field mirror and protective lens should be cleaned regularly with specialized lens cleaning solution and wipes to prevent dust and debris from affecting laser quality.
• د کار ساحه: Keep the work platform and surrounding area clean from debris and dust.
• بهر: د ماشین بهرنۍ برخه د نرم، وچ ټوکر سره پاک کړئ.

6.2 General Upkeep

• د کیبل معاینه: Periodically check all cables for signs of wear or damage.
• د سافټویر تازه معلومات: Keep your engraving software updated to the latest version for performance improvements and new features.
• د چاپیریال شرایط: Operate the machine in a stable environment, avoiding extreme temperatures or humidity.

7. ستونزه حل کول

This section addresses common issues you might encounter. For problems not listed here, contact Monport customer support.

8. تخنیکي مشخصات

۹. د پیرودونکو ملاتړ او تضمین

Monport is committed to providing excellent customer service. If you encounter any issues or have questions regarding your Monport 60W JPT & MOPA Fiber Laser Engraver, please contact our support team.

د اړیکو معلومات:

• Webسایټ: Visit the official Monport webد ملاتړ سرچینو، FAQs، او د اړیکو توضیحاتو لپاره سایټ.
• بریښنالیک: Refer to your purchase documentation for the dedicated support email address.
• تلیفون: Check the Monport webد پیرودونکو خدماتو د تلیفون شمیرو لپاره سایټ.

د تضمین معلومات:

Your Monport 60W JPT & MOPA Fiber Laser Engraver is covered by a manufacturer's warranty. Please refer to the warranty card included with your product or the official Monport webد تفصيلي شرایطو او مقرراتو لپاره سایټ، په شمول د تضمین موده او پوښښ.