1. پیژندنه
This user manual provides essential information for the safe and effective operation of your Monport 50W Fiber Laser Engraver, Model YXF50. This integrated mini fiber laser marking machine is designed for high-precision engraving and marking on various metal and non-metal materials. Please read this manual thoroughly before initial use to ensure proper setup, operation, and maintenance.
Figure 1.1: Monport 50W Fiber Laser Engraver, Model YXF50.
2. د خوندیتوب معلومات
WARNING: This is a Class 4 laser product. Direct exposure to the laser beam can cause severe eye and skin damage. Always follow safety precautions.
2.1 عمومي خوندیتوب لارښوونې
- د سترګو ساتنه: Always wear certified laser safety glasses appropriate for the laser's wavelength (1064nm) when the machine is in operation.
- د پوستکي ساتنه: Avoid direct exposure of skin to the laser beam.
- وینټیلیشن: Ensure adequate ventilation in the work area to remove fumes and particles generated during engraving. Consider a fume extractor.
- د اور وژنې خوندیتوب: Keep a fire extinguisher nearby. Do not engrave flammable materials without proper precautions.
- څارنه: هیڅکله ماشین د عملیاتو پرمهال مه پریږدئ.
- مجاز پرسونل: Only trained and authorized personnel should operate the laser engraver.
- اضطراري تمځای: د بیړني تمځای تڼۍ د موقعیت او عملیاتو سره ځان بلد کړئ.
2.2 بریښنایی خوندیتوب
- ډاډ ترلاسه کړئ چې ماشین په سمه توګه مینځل شوی.
- په لمدو لاسونو او یا په لمبو کې کار مه کوئamp شرایط
- د هر ډول ساتنې یا سمون ترسره کولو دمخه بریښنا قطع کړئ.
3. ترتیب او نصب کول
The Monport 50W Fiber Laser Engraver is designed for straightforward setup. Follow these steps to prepare your machine for operation.
3.1 پیک کول او تفتیش کول
- په احتیاط سره د بسته بندۍ څخه ټولې برخې لرې کړئ.
- Inspect the machine for any signs of damage during transit. Report any damage to Monport support immediately.
- Verify all accessories listed in the packing list are present.
3.2 مجلس
The integrated design minimizes assembly. Typically, this involves securing the laser head column to the base unit.
- Place the base unit on a stable, level surface.
- Attach the vertical column with the laser head to the designated mounting points on the base. Secure it firmly using the provided screws.
- Connect any necessary cables (power, USB) as indicated in the quick start guide included with your machine.
Figure 3.1: Compact design and key specifications of the Monport 50W Fiber Laser Engraver.
3.3 د سافټویر نصب کول
Your Monport 50W Fiber Laser Engraver is compatible with LightBurn and BSLcad software. Installation files and backup parameters are typically provided on a USB drive included in the packaging.
- Insert the provided USB drive into your computer.
- Follow the instructions on the USB drive to install your preferred software (LightBurn or BSLcad).
- Install the necessary drivers for the laser engraver to communicate with your computer.
- Configure the software according to the provided parameters for your specific machine model (YXF50).
4. عملیاتي لارښوونې
This section outlines the basic steps for operating your Monport 50W Fiber Laser Engraver.
۵.۱ د بریښنا فعالول او لومړني چکونه
- Ensure all safety precautions are in place, including wearing laser safety glasses.
- Connect the power cable and turn on the main power switch on the machine.
- Launch the engraving software (LightBurn or BSLcad) on your computer.
- Verify that the software recognizes the laser engraver.
۵.۲ د موادو ځای پر ځای کول او تمرکز کول
- Place your material on the work platform.
- Adjust the Z-axis (height of the laser head) until the laser is properly focused on the material surface. The machine features a red dot pointer to assist with focusing and positioning.
- مهم: Remember to remove the lens cap before operation.
Figure 4.1: Optimal marking area of 150x150mm for the 50W fiber laser.
4.3 Software Operation and Engraving
- په سافټویر کې خپل ډیزاین وارد کړئ یا جوړ کړئ.
- Set engraving parameters such as power, speed (up to 10000mm/s), frequency, and passes based on the material and desired effect.
- Use the software's framing function to preview the engraving area on your material.
- Initiate the engraving process. Monitor the machine closely during operation.
شکل 4.2: پایview of key features including 10000mm/s speed and 50W power.
Figure 4.3: Illustration of the 0.01mm ultra-fine spot precision.
۳.۱ مطابقت لرونکي مواد
The Monport 50W Fiber Laser Engraver is suitable for marking and engraving a wide range of materials:
- فلزات: Gold, Silver, Copper, Stainless Steel, Brass, Titanium, Aluminum, Platinum, etc.
- پلاستیک: Certain types of plastics.
- نور: Some ceramics, leather, painted metals.
شکل 4.4: مثالamples of materials compatible with the fiber laser engraver.
5. ساتنه
Regular maintenance ensures optimal performance and extends the lifespan of your Monport 50W Fiber Laser Engraver.
۴.۱ د لینز پاکول
The F-theta field lens is a critical component. Keep it clean to maintain engraving quality.
- فریکونسی: Clean the lens regularly, especially if you notice a decrease in engraving quality or power.
- کړنلاره: Use a specialized lens cleaning solution and lint-free wipes. Avoid touching the lens surface with bare hands.
5.2 عمومي پاکول
- Keep the work area and the machine's exterior free of dust and debris.
- ډاډ ترلاسه کړئ چې د هوا د بهېدو جالونه خنډ نه وي.
5.3 د سافټویر تازه معلومات
Periodically check for software updates for LightBurn or BSLcad to benefit from new features and performance improvements.
6. ستونزه حل کول
دا برخه هغه عامې ستونزې په ګوته کوي چې تاسو ورسره مخ کیدی شئ او احتمالي حلونه وړاندې کوي.
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| د لیزر محصول نشته | Lens cap still on, emergency stop engaged, power issue, software not connected. | Remove lens cap, disengage emergency stop, check power connections, verify software connection. |
| د نقاشۍ ضعیف کیفیت | Incorrect focus, dirty lens, incorrect power/speed settings, material not suitable. | Adjust focus, clean lens, optimize engraving parameters, ensure material compatibility. |
| Machine not recognized by software | USB cable issue, driver not installed, software configuration error. | Check USB cable, reinstall drivers, verify software settings. |
| Red dot pointer not visible | Pointer disabled in software, hardware malfunction. | Enable pointer in software settings. If issue persists, contact support. |
7. مشخصات
Key technical specifications for the Monport 50W Fiber Laser Engraver (Model YXF50):
- ماډل: YXF50
- د لیزر ډول: فایبر لیزر
- د لیزر ځواک: 50W (50000 mW output power)
- د لیزر ټولګي: ټولګي 4
- مکس د نښه کولو سرعت: 10000 mm/s
- د نقاشۍ دقت: 0.01mm
- کاري ساحه: ۸۸ ملي متره x ۹۸ ملي متره (۳.۸ انچه x ۳.۴ انچه)
- Max Z-Height: 350mm
- د عمر موده: تر 100,000 ساعتونو پورې
- مطابقت لرونکی سافټویر: LightBurn, BSLcad
- مناسب عملیاتي سیسټمونه: وینډوز، macOS
- د محصول وزن: ۷.۰ کیلو ګرامه (۱۵.۵ پونډه)
- مواد: المونیم
- رنګ: خړ
- د عملیاتو حالت: لارښود
Figure 7.1: Speed capabilities of the Monport 50W Fiber Laser Engraver.
8. تضمین او ملاتړ
8.1 د تضمین معلومات
For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Monport webسایټ. د تضمین ادعاوو لپاره د پیرود ثبوت وساتئ.
8.2 د پیرودونکي ملاتړ
If you encounter any issues not covered in this manual or require technical assistance, please contact Monport customer support. You can find contact information on the official Monport webسایټ یا ستاسو د پیرود پلیټ فارم له لارې.
Monport Direct: د پلورونکي معلومات
Figure 8.1: Optional accessories for enhanced functionality and safety.
