SCULPFUN iCube Pro 5W Laser Engraver User Manual

1. پیژندنه

This user manual provides essential information for the safe and efficient operation of your SCULPFUN iCube Pro 5W Laser Engraver. Please read this manual thoroughly before using the device to ensure proper setup, operation, and maintenance. Retain this manual for future reference.

Image: The SCULPFUN iCube Pro 5W Laser Engraver, a compact blue and yellow unit, shown with an engraved wooden disc.

2. د خوندیتوب معلومات

خبرداری: This product is a Class 4 laser device. Direct exposure to the laser beam can cause severe eye injury and skin burns. Always wear the provided safety goggles during operation. Never look directly into the laser.

• ډاډ ترلاسه کړئ چې د کار ساحه ښه هوا لري.
• ماشین د سوځیدونکي موادو سره نږدې مه چلوئ.
• ماشومان او څاروي د عملیاتي ساحې څخه لرې وساتئ.
• The built-in temperature alarm will sound and the machine will stop if the internal temperature exceeds 45°C. Do not override this safety feature.
• تل د ساتنې یا پاکولو دمخه بریښنا قطع کړئ.
• یوازې د وسیلې سره چمتو شوي بریښنا اډاپټر وکاروئ.

Image: Diagram illustrating the temperature sensing safety alarm feature, showing the engraver with an alarm icon and a thermometer indicating 45°C.

3. د محصول ب Featuresې

• Cutting and Engraving 2-in-1: Equipped with a 5W diode laser and 0.06mm ultra-fine laser focus, allowing for strong cutting penetration (up to 10mm soft board, 6mm acrylic) and ultra-fine engraving of delicate patterns.
• Built-in Smoke Filtering System: Features a high-efficiency smoke filter, eliminating the need for an external smoke exhaust box and effectively filtering smoke during engraving.
• دحرارت الارم: An integrated safety system that stops the machine and sounds an audible alarm if the internal temperature exceeds 45°C, ensuring user and machine safety.
• د لوړ سرعت نقاشي: Utilizes a new 32-bit high-speed engraving motherboard, achieving speeds of up to 10,000mm/min, significantly improving engraving efficiency.
• Semi-open Structure Design: The removable laser protective shield allows for engraving objects both inside the machine and by placing the machine on the surface of larger objects. The working area is 130x130mm.
• د پیوستون څو طریقې: Supports connection via mobile phone (Sculpfun APP), computer (BT function or Type-C interface), compatible with Win7/Win8/Win10/Win11/MAC/IOS/Android/Linux systems.

انځور: نږدې انځور view demonstrating the 0.06mm ultra-fine laser focus and the machine's ability to cut 10mm wood and engrave fine details.

انځور: چاودنه وشوه view showing the components of the built-in smoke filtering system, including the removable window structure, smoke dust filter, activated carbon smell filter, and strong suction fan.

انځور: دوه views of the engraver demonstrating its semi-open design, allowing it to engrave objects placed inside or on top of larger items.

Image: Depiction of the various connection methods supported, including mobile app and computer connections via Wi-Fi, Bluetooth, USB, and TF Card.

4. د بسته محتويات

مهرباني وکړئ تصدیق کړئ چې لاندې ټول توکي ستاسو په کڅوړه کې شامل دي:

• SCULPFUN iCube Pro 5W Laser Engraver Unit
• د لیزر سر
• د بریښنا اډاپټر
• د بریښنا کیبل
• د ډول-C کیبل
• فلزي پلیټ
• د پنبې فلټر
• U-Shaped Shield
• Lens Repair Kit
• د خوندیتوب چشمې
• MDF Sampد بورډ
• Basswood Sampد بورډ

Image: A visual representation of all components included in the SCULPFUN iCube Pro 5W package, laid out neatly.

5. د تنظیم کولو لارښود

Follow these steps to set up your SCULPFUN iCube Pro 5W Laser Engraver:

1. بسته بندي کول: په احتیاط سره د بسته بندۍ څخه ټولې برخې لرې کړئ.
2. ځای په ځای کول: نقاش په یوه مستحکم، هواره سطحه کې په ښه هوا لرونکي سیمه کې ځای په ځای کړئ، د اور اخیستونکو موادو څخه لرې.
3. بریښنا وصل کړئ: Connect the power adapter to the engraver and then plug it into a suitable power outlet.
4. له کمپیوټر/ګرځنده وسیلې سره وصل شئ:
   • د USB پیوستون: Use the provided Type-C cable to connect the engraver to your computer.
   • بلوتوث/وای فای: Refer to the Sculpfun APP instructions for wireless connection setup.
5. د سافټویر نصب کول: Install the recommended engraving software (e.g., LightBurn, LaserGRBL) on your computer or the Sculpfun APP on your mobile device.
6. د ډرایور نصب کول (که اړتیا وي): Ensure all necessary drivers for the USB connection are installed. You may need to check Device Manager on Windows to confirm the COM port.
7. د سافټویر لومړنی ترتیب:

   For LightBurn, follow the on-screen wizard to set up your device. Select "GRBL" as the device type and "Serial/USB" for connection. Input the work area dimensions as 130mm x 130mm. Ensure "Auto home your laser on startup" is enabled for proper calibration.

   Video: This video demonstrates the initial connection and setup process for the SCULPFUN iCube using LightBurn software, including selecting the correct device type and setting up the work area dimensions.
8. Test Engraving: Before starting any major project, perform a small test engraving on a sample material to verify settings and functionality.

6. عملیاتي لارښوونې

This section outlines the general steps for operating your laser engraver. Specific software instructions will vary.

1. د موادو چمتو کول: Place the material to be engraved or cut on the metal plate inside the engraver. Ensure it is flat and securely positioned. For larger objects, the semi-open design allows the engraver to be placed directly on top of the material.
2. Design/Load Project: Open your engraving software (e.g., LightBurn, Sculpfun APP) and either create a new design or load an existing project file.
3. تنظیمات تنظیم کړئ: Configure the laser parameters (power, speed, passes) according to the material type and desired effect. Refer to material testing guides for optimal settings.
4. مخکېview and Frame: د سافټویر پری وکاروئview function to visualize the engraving path. Utilize the "Frame" function on the engraver to ensure the laser path is within the boundaries of your material.
5. د خوندیتوب عینکې واغوندئ: Always wear the provided safety goggles before initiating any laser operation.
6. نقاشي/پرې کول پیل کړئ: Initiate the process from your software. Monitor the engraving process closely.
7. Monitor Safety Features: Pay attention to the temperature alarm. If it activates, stop the machine immediately and allow it to cool down.
8. بشپړول: Once the process is complete, wait for the laser to stop completely before opening the protective shield or removing the material.

7. ساتنه

Regular maintenance ensures optimal performance and extends the lifespan of your engraver.

• د لیزر لینز پاکول: Periodically clean the laser lens using a soft, lint-free cloth and lens cleaning solution. Refer to the lens repair kit instructions for proper procedure.
• د فلټرونو بدلول: The smoke filter will accumulate dust and debris over time. Replace the cotton filter and activated carbon smell filter as needed to maintain effective smoke filtration. One free filtering set is included, and additional sets can be purchased.
• عمومي پاکول: Keep the interior and exterior of the engraver clean from dust and debris. Use a soft brush or compressed air for hard-to-reach areas.
• د فرم ویئر تازه معلومات: Check the SCULPFUN official webد شته فرم ویئر تازه معلوماتو لپاره سایټ یا اپلیکیشن وګورئ ترڅو ډاډ ترلاسه کړئ چې ستاسو وسیله وروستي ځانګړتیاوې او د بګ اصلاحات لري.

8. ستونزه حل کول

دا برخه هغه عامې ستونزې په ګوته کوي چې تاسو ورسره مخ کیدی شئ.

9. مشخصات

10. تضمین او ملاتړ

For warranty information and technical support, please refer to the official SCULPFUN webسایټ ته مراجعه وکړئ یا مستقیم د دوی د پیرودونکو خدماتو سره اړیکه ونیسئ. د پیرود ثبوت په توګه د پیرود رسید وساتئ.

جوړونکی: SCULPFUN
د لومړي شتون نیټه: د ۲۰۲۲ کال د دسمبر ۵ مه

د نورو مرستو لپاره، تاسو کولی شئ لیدنه وکړئ SCULPFUN Store on Amazon.