د Geberit 300 اساسي تشناب څوکۍ د پوښ سره د کارونکي لارښود

1. پیژندنه

Thank you for choosing the Geberit 300 Basic Toilet Seat with Lid. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new toilet seat. Please read these instructions carefully before beginning installation and retain them for future reference.

Figure 1: Geberit 300 Basic Toilet Seat with Lid. This image shows the Geberit 300 Basic Toilet Seat with Lid in white, featuring its D-shaped design.

2. د خوندیتوب معلومات

• Always ensure the toilet bowl is clean and dry before installation.
• Do not use abrasive cleaners or harsh chemicals on the toilet seat, as this may damage the material.
• Avoid standing on the toilet seat or lid, as this can cause damage or injury.
• Keep small parts out of reach of children during installation.
• If any parts are missing or damaged, do not proceed with installation. Contact customer support.

3. د بسته محتويات

مهرباني وکړئ د نصبولو پیل کولو دمخه وګورئ چې ټولې برخې شتون لري:

• Geberit 300 Basic Toilet Seat
• Geberit 300 Basic Toilet Lid
• د نصبولو هارډویر (بولټونه، واشیرونه، مغز لرونکي)

4. ترتیب او نصب کول

Follow these steps to install your Geberit 300 Basic Toilet Seat:

1. د تشناب کاسه چمتو کړئ: Ensure the toilet bowl's mounting holes are clean and free of debris. If replacing an old seat, remove it completely.
2. Position the Mounting Hardware: Insert the bolts through the mounting holes on the toilet bowl.
3. څوکۍ ضمیمه کړئ: Place the toilet seat onto the bolts, aligning the seat's hinge points with the bolts.
4. څوکۍ خوندي کړئ: د تشناب د کاسې لاندې، د واشرونو په بولټونو کې ځای په ځای کړئ، او بیا مغز لرونکي. په پیل کې مغز لرونکي په لاس سره ټینګ کړئ.
5. سمون کول: Adjust the position of the seat to ensure it is centered and aligned with the toilet bowl.
6. وروستی کلکوالی: Once aligned, fully tighten the nuts. Do not overtighten, as this can damage the ceramic or the seat.

Refer to the diagrams below for product dimensions to ensure compatibility with your toilet bowl:

شکل 2: پورته View Dimensions. A technical drawing illustrating the top-down view of the toilet seat, indicating a width of 370mm and a length of 445mm.

شکل 3: اړخ View Dimensions. A technical drawing illustrating the side profile of the toilet seat, showing a height of approximately 5mm for the lid.

5. عملیاتي لارښوونې

The Geberit 300 Basic Toilet Seat is designed for straightforward use:

• To use the toilet, simply lift the lid and then the seat.
• After use, gently lower the seat and then the lid.

6. ساتنه او پاکول

Proper maintenance ensures the longevity and hygiene of your toilet seat:

• منظم پاکول: Clean the toilet seat regularly with a mild soap solution and a soft cloth.
• د سختو کیمیاوي موادو څخه ډډه وکړئ: Do not use abrasive cleaners, scouring pads, or strong chemical detergents, as these can scratch or discolor the plastic surface.
• وچول: Always dry the seat thoroughly after cleaning to prevent water spots and maintain hygiene.
• د قبضې پاملرنه: Periodically check the hinge connections for tightness. If the seat feels loose, gently retighten the mounting nuts.

7. ستونزه حل کول

8. مشخصات

9. تضمین او ملاتړ

For warranty information or technical support, please refer to the official Geberit website or contact your local Geberit dealer. Please have your model number (S8H51203000G) available when contacting support.

جوړونکی: Geberit

په Amazon.com.be کې د شتون نیټه: د ۲۰۲۳ کال د نومبر ۳۰مه