محصول پای ته ورسیدview
The ABB SD203/40 is a robust 3-pin main switch disconnect switch designed for reliable electrical isolation. It features a 40A rated current and 440VAC rated voltage, making it suitable for various industrial and home improvement electrical applications. This device is equipped with a red shift handle and a clear switch position indicator for easy operation and status verification. Its compact dimensions and DIN rail mount compatibility ensure straightforward installation within System pro M compact setups.
شکل 1: مخکی view of the ABB SD203/40 Main Switch Disconnect Switch, showing the red operating handle and terminal connections.
د خوندیتوب معلومات
خبرداری: Installation and maintenance should only be performed by qualified personnel. Disconnect all power before working on the device. Failure to follow these instructions may result in serious injury or death.
- Always ensure the main power supply is turned off and locked out before installation or servicing.
- حجم تایید کړئtage and current ratings match your application requirements.
- که چیرې سویچ خراب ښکاري نو مه یې چلوئ.
- ټول محلي او ملي بریښنایی کوډونو ته غاړه کیږدئ.
تنظیم او نصب کول
- پورته کول: The SD203/40 is designed for DIN rail mounting. Securely snap the device onto a standard 35mm DIN rail within an appropriate enclosure.
- تارونه:
- Connect the incoming power lines to the upper terminals (L1, L2, L3 for a 3-phase system).
- Connect the outgoing load lines to the lower terminals (T1, T2, T3).
- ډاډ ترلاسه کړئ چې ټولې اړیکې ټینګې او خوندي دي ترڅو د تماسونو د خلاصیدو او ډیر تودوخې مخه ونیول شي.
- Verify correct polarity and phase sequence if applicable.
- تایید: د تارونو له لګولو وروسته، ټولې اړیکې د سموالي او ټینګښت لپاره دوه ځله وګورئ. ډاډ ترلاسه کړئ چې هیڅ خلاص تارونه ښکاره نه وي.
عملیاتي لارښوونې
The ABB SD203/40 features a clear red operating handle and a switch position indicator for intuitive control.
- د فعالولو لپاره: Push the red handle upwards to the "ON" position. The indicator will show the "ON" status.
- د بندولو لپاره: Pull the red handle downwards to the "OFF" position. The indicator will show the "OFF" status, providing a visible break.
- تالاشي/Tagبهر: For maintenance or safety procedures, the switch can be locked in the "OFF" position using appropriate lockout devices (not included) to prevent accidental re-energization.
ساتنه
The SD203/40 is designed for minimal maintenance. However, periodic checks are recommended to ensure optimal performance and safety.
- بصري تفتیش (کلنی): Check for any signs of physical damage, discoloration, or overheating on the device and its terminals.
- Terminal Tightness (As Needed): Periodically verify that all terminal connections remain tight. Loose connections can lead to increased resistance and heat.
- پاکول: If necessary, gently clean the exterior of the device with a dry, lint-free cloth. Do not use abrasive cleaners or solvents.
Note: Any internal maintenance or repair should only be performed by authorized ABB service personnel.
د ستونزو حل کول
This section provides guidance for common issues. For complex problems, contact qualified electrical personnel.
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| سویچ نه چالانیږي. | No incoming power; internal fault. | Check upstream power supply. If power is present, the unit may be faulty and require replacement. |
| Switch feels hot. | Overload; loose connections. | Verify load current does not exceed 40A. Check and tighten all terminal connections. |
| Visible damage to casing. | Physical impact; improper handling. | Do not use. Replace the unit immediately to ensure safety and proper function. |
مشخصات
| صفت | ارزښت |
|---|---|
| برانډ | اينځر |
| د ماډل شمیره | SD203/40 |
| اوسنۍ درجه بندي | 40 Amps |
| والیtage درجه بندي | 440 VAC |
| د پولو شمیر | ۳-پن |
| د سرکیټ ماتونکي ډول | معیاري |
| د نصب کولو ډول | DIN ریل ماونټ |
| Conditional Rated Short Circuit Current | 25 kA |
| د محصول ابعاد (H x D x W) | 88 x 69 x 52.50 mm (approx. 2.07"D x 2.07"W x 2.07"H) |
| د توکي وزن | 9.2 اونس |
| مواد | فلزي، پلاستيک |
| رنګ | White (with red handle) |
| GTIN | 04016779904216 |
تضمین او ملاتړ
د تضمین معلوماتو او تخنیکي ملاتړ لپاره، مهرباني وکړئ د ABB رسمي دفتر ته مراجعه وکړئ. website or contact your local ABB distributor. Keep your purchase receipt for warranty claims.
- د ABB رسمي Webسایټ: www.abb.com
- د پیرودونکو خدمت: په ABB کې ورکړل شوي د اړیکو معلوماتو ته مراجعه وکړئ. webستاسو د سیمې لپاره سایټ.
