د بوټسلیب هارډویر کټ کارونکي لارښود

1. پیژندنه

This manual provides detailed instructions for the installation and operation of the BOTSLAB Hardwire Kit. This kit is specifically designed for use with BOTSLAB G980H, G980H Pro, and G980H Multi Channel dash cameras, featuring a Type-C port. The hardwire kit enables advanced parking surveillance features and protects your vehicle's battery from discharge.

Image: The BOTSLAB Hardwire Kit, showing the Type-C connector, power conversion box, and the three exposed wires (ACC, VCC+, GND-).

2. د بسته محتويات

مهرباني وکړئ تصدیق کړئ چې لاندې ټول توکي ستاسو په کڅوړه کې شامل دي:

• د هارډویر کټ x ۱
• د کارن لارښود x 1

Image: The package contents, including the hardwire kit and a user manual.

3. محصول ختم شوview

The BOTSLAB Hardwire Kit provides a stable power supply to your dash cam, enabling parking surveillance modes and protecting your vehicle's battery. It features a 9ft long cable for versatile installation in most car types.

مهمې برخې:

• د ډول-C نښلونکی: Connects to your compatible BOTSLAB dash cam.
• Power Conversion Box: د ننوتلو حجم تنظیمويtage (DC12V-30V) to output voltage (5V/2.4A) for the dash cam.
• تارونه:
  • Yellow Wire (ACC): Connects to an Accessory (switched) power source.
  • Red Wire (VCC+): Connects to a Constant (always-on) power source.
  • Black Wire (GND-): Connects to a Grounding point.

انځور: نږدې انځور view of the hardwire kit, highlighting the Type-C connector, power conversion box, and the labeled yellow (ACC), red (VCC+), and black (GND-) wires.

4. د نصب لارښود

Follow these steps for a proper and secure installation of your hardwire kit. Professional installation is recommended if you are unfamiliar with vehicle electrical systems.

مطابقت:

This hardwire kit is exclusively compatible with BOTSLAB G980H, G980H Pro, G980H 4-Channel, and G980H 3-Channel dash cameras that utilize a Type-C port.

Image: Illustration showing the hardwire kit alongside compatible BOTSLAB dash cam models (G300HPlus and G980H series), emphasizing the 9ft cable length.

د نصبولو مرحلې:

1. Step 1: Test Power Sources

   Use a multimeter to identify a 12V constant power source (always on) and an Accessory (ACC) power source (on when the ignition is on) in your car's fuse box. Ensure the chosen fuse slots are appropriate for drawing power.

2. Step 2: Set Up the Wires

   سره وصل کړئ ژیړ تار (ACC) to the identified ACC power source. Connect the سور تار (VCC+) to the identified constant power source. Connect the Black Wire (GND-) to a metal grounding point on the vehicle chassis.

   یادونه: Some vehicles, particularly newer models or specific brands like Subaru, may use micro fuses that require specific fuse adapters for proper connection. The kit does not include fuse adapters, which may need to be purchased separately depending on your vehicle's fuse type.
3. Step 3: Connect the Dash Cam

   Route the Type-C cable neatly to your dash cam's mounting location and plug the Type-C connector into the dash cam's power port.

Image: Visual guide for the easy installation process, showing testing power sources with a multimeter, connecting the ACC, VCC+, and GND- wires, and finally connecting the Type-C cable to the dash cam.

۳. عملیاتي ځانګړتیاوې

Once properly installed, the hardwire kit unlocks several key features for your BOTSLAB dash cam:

Secure Parking Protection:

The hardwire kit enables continuous monitoring of your vehicle for up to 24 hours while parked. This includes:

• د وخت تیريدو ثبتول: ریکارډونه footage at a reduced frame rate to conserve storage space, capturing extended periods of surveillance.
• Collision-Triggered Normal Recording: Automatically activates normal recording mode upon detecting an impact or collision while parked, ensuring critical event footage نیول شوی دی.

Image: A dash cam screen showing 'Parking Mode: Time-Lapse Recording' and 'Driving Mode: Normal Recording', illustrating the 24-hour monitoring capability.

Image: A visual representation of the 24-hour parking surveillance, including time-lapse recording and collision-detected recording, enabled by the hardwire kit.

Battery Drain Prevention:

The hardwire kit incorporates under-voltage protection, which automatically cuts off power to the dash cam if your vehicle's battery voltage drops below a safe threshold. This prevents excessive battery discharge, ensuring your car can start reliably.

Image: A graphic indicating the voltage range (DC12V-30V) and output voltage (5V/2.4A) of the hardwire kit, emphasizing its role in preventing battery drain.

6. ساتنه

To ensure optimal performance and longevity of your BOTSLAB Hardwire Kit, consider the following maintenance tips:

• منظم معاینه: Periodically check the wiring connections in your fuse box and to the dash cam to ensure they remain secure and free from corrosion.
• د کیبل مدیریت: Ensure all cables are neatly tucked away and not exposed to excessive heat, sharp edges, or moving parts that could cause damage.
• پاکوالی: Keep the power conversion box and connectors free from dust and debris.

7. ستونزه حل کول

If you encounter issues with your BOTSLAB Hardwire Kit, refer to the following common problems and solutions:

• ډش کیم نه فعالیږي:
  • Check all wire connections (ACC, VCC+, GND-) to ensure they are securely attached.
  • Verify that the fuse in the chosen fuse slot is not blown. Replace if necessary.
  • Confirm that the Type-C connector is fully inserted into the dash cam.
  • ډاډ ترلاسه کړئ چې د موټر بیټرۍ کافي چارج لري.
• د پارکینګ حالت نه فعالیږي:
  • Confirm that both the ACC (yellow) and VCC+ (red) wires are correctly connected to their respective power sources. Parking mode requires a constant power supply.
  • Check your dash cam's settings to ensure parking mode is enabled and configured correctly.
• Vehicle Battery Drains Quickly:
  • While the kit has under-voltage protection, prolonged parking mode in extremely cold weather or with an aging battery can still lead to discharge. Consider reducing parking mode duration if this occurs frequently.
  • Ensure the under-voltage protection threshold is set correctly in your dash cam's settings (if adjustable).
• Difficulty Connecting Wires to Fuse Box:
  • Some vehicles require specific fuse tap adapters for a secure and safe connection to the fuse box. If the bare wires cannot be safely inserted or wrapped around the fuse legs, acquire appropriate fuse taps for your vehicle's fuse type (e.g., mini, micro, ATM, ATO).

8. مشخصات

9. تضمین او ملاتړ

For warranty information, technical support, or any inquiries regarding your BOTSLAB Hardwire Kit, please contact BOTSLAB customer service directly. You can find contact details on the official BOTSLAB webسایټ یا د پرچون پلورونکي له لارې چیرې چې تاسو محصول اخیستی.

Visit the official BOTSLAB Store for more information: BOTSLAB Store on Amazon