د ایټن بي لاین لړۍ B422-1 1/2AL ښي زاویه بیم Clamp د لارښوونې لارښود

1. پیژندنه

This manual provides comprehensive instructions for the safe and effective installation, operation, and maintenance of the Eaton B-line Series B422-1 1/2AL Right Angle Beam Clamp. This aluminum clamp is designed for securing pipes or conduits to structural beams at a right angle, offering a robust connection with a specified load capacity.

Please read this manual thoroughly before installation and retain it for future reference. Adherence to these instructions will ensure proper function and safety.

2. د خوندیتوب معلومات

WARNING: Failure to follow these safety instructions may result in property damage, serious injury, or death.

• د نصبولو پرمهال تل مناسب شخصي محافظتي تجهیزات (PPE) واغوندئ، په شمول د خوندیتوب عینکې او دستکشې.
• Ensure the structural beam and the pipe/conduit are capable of supporting the combined weight of the clamp, attached items, and any potential loads.
• Do not exceed the maximum rated load capacity of 500 lbs for this clamp.
• Verify that all bolts and nuts are securely tightened to the manufacturer's recommended torque specifications (if available, otherwise ensure firm tightness without over-tightening).
• cl معاینه کړئamp and surrounding structure regularly for signs of wear, corrosion, or damage. Replace damaged components immediately.
• Installation should be performed by qualified personnel familiar with local building codes and safety regulations.

3. د محصول اجزا

The Eaton B-line Series B422-1 1/2AL Right Angle Beam Clamp typically consists of the following components:

• اصلي clamp body (aluminum)
• U-bolt or similar pipe-securing mechanism
• Mounting bolts and nuts (quantity as required for secure fastening)

شکل 1: Illustration of the Eaton B422-1 1/2AL Right Angle Beam Clamp in an installed configuration.

This illustration demonstrates the correct installation of the Eaton B422-1 1/2AL Right Angle Beam Clamp. It shows the clamp securing a cylindrical pipe to the flange of a structural beam using two bolts and nuts. The clamp body is positioned over the beam flange, and the pipe is cradled by the U-shaped portion of the clamp, secured by the bolts.

4. ترتیب او نصب کول

1. د نصبولو ځای وپیژنئ: Select a suitable structural beam that can safely support the intended load. Ensure the beam flange is compatible with the clampډیزاین
2. د Cl ځای ونیسئamp: Place the main body of the B422-1 1/2AL clamp over the edge of the structural beam's flange. The curved portion designed to hold the pipe should face downwards.
3. Insert Pipe/Conduit: Carefully position the 1 1/2-inch pipe or conduit into the U-shaped cradle of the clamp.
4. خوندي فاسټینرونه: Insert the provided bolts through the clamp body and the pipe-securing mechanism. Thread the nuts onto the bolts.
5. اړیکې ټینګول: Using appropriate tools, gradually tighten the nuts evenly until the clamp firmly grips both the beam and the pipe. Avoid over-tightening, which can damage the clamp or the pipe. Ensure the clamp باثباته دی او نه لړزېږي.
6. وروستۍ معاینه: Visually inspect the installed clamp to confirm it is properly seated, all fasteners are tight, and the pipe is securely held.

5. عملیاتي لارښوونې

The Eaton B422-1 1/2AL beam clamp is a static support device. Its "operation" primarily involves ensuring it remains securely installed and within its load limits.

• د بارولو ظرفیت: د cl موضوع مه کوئamp to loads exceeding 500 lbs. This rating includes the weight of the pipe/conduit and any contents or attached equipment.
• متحرک بارونه: دا کلیکamp is designed for static loads. Avoid applications involving significant vibration, shock, or dynamic forces unless specifically engineered for such conditions.
• د چاپیریال په اړه نظرونه: ډاډ ترلاسه کړئ چې clamp is used in environments compatible with aluminum construction. Avoid exposure to corrosive agents that could compromise material integrity.

6. ساتنه

Regular maintenance ensures the longevity and safety of the beam clamp.

• وختي معاینه: Conduct visual inspections at least annually, or more frequently in harsh environments or high-stress applications. Check for:
  • لوز فاسټینرونه.
  • Signs of corrosion, cracks, or deformation on the clamp body or fasteners.
  • Damage to the pipe or beam at the clampنقطه.
• فاسټینرونه سخت کړئ: Re-tighten any loose bolts and nuts to ensure secure attachment.
• پاکول: کلی پاک کړئamp as needed to remove dirt, dust, or debris that could obscure damage or contribute to corrosion.
• بدلول: If any part of the clamp shows significant wear, damage, or corrosion, replace the entire clamp assembly. Do not attempt to repair damaged clamps.

7. ستونزه حل کول

This section addresses common issues that may arise with beam clamp تاسیسات

• Clamp is Loose:
  • لامل: Fasteners not tightened sufficiently or have loosened over time.
  • حل لاره: Re-tighten all bolts and nuts securely. If loosening persists, consider using thread-locking compound (if compatible with materials and environment) or consult a professional.
• Pipe/Conduit Slipping:
  • لامل: ناکافي clamping force, incorrect pipe size, or excessive load.
  • حل لاره: Ensure fasteners are tight. Verify the pipe diameter is 1 1/2-inch for optimal fit. Reduce the load if it exceeds the clamp's capacity.
• Visible Damage to Clamp:
  • لامل: Overloading, impact, or material fatigue.
  • حل لاره: Immediately remove the clamp from service and replace it with a new, undamaged unit. Do not use damaged clamps.

8. مشخصات

9. د ملاتړ او اړیکو معلومات

For technical assistance, product inquiries, or to report issues, please contact Eaton Electrical customer support. Refer to the official Eaton website for the most current contact details and additional product resources.

Eaton Electrical Official Webسایټ: www.eaton.com

Please note that product specifications and information are subject to change without notice. Always refer to the latest documentation provided by the manufacturer.