1. پیژندنه
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your SEAFLO 23A Series Automatic Demand Diaphragm Pump. The 23A Series is designed for liquid transfer, pressurization, and circulation in various applications. It features a compact design with a flow rate up to 1.5 GPM (5.6 LPM) and pressure up to 120 PSI (8.2 Bar). Please read this manual thoroughly before installation and use.
2. د خوندیتوب معلومات
Observe all safety precautions to prevent injury or damage. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- د پمپ د خدمت کولو دمخه تل بریښنا قطع کړئ.
- د بریښنا مناسبه ځمکه ډاډمن کړئ.
- Do not pump flammable liquids. This pump is designed for water and compatible non-flammable liquids.
- پمپ د یخنۍ تودوخې څخه خوندي کړئ.
- ډاډ ترلاسه کړئ چې ټولې اړیکې خوندي او له لیک څخه پاک دي.
- Do not operate the pump dry for extended periods, although it has dry run capability.
3. محصول ختم شوview
The SEAFLO 23A Series pump is a self-priming, automatic demand diaphragm pump. Key features include:
- Open flow up to 1.5 GPM (5.6 LPM)
- Max Self-priming up to 5 feet (1.5m)
- Waterproof grade IP54 with extra cover
- On-demand long life pressure switch
- Configurable reflux function
- Ignition protected, CE, RoHS certified
- Multiple connector options for adaptability
شکل 1: مخکی view of the SEAFLO 23A Series Automatic Demand Diaphragm Pump. Shows the pump body with 'FLOW' indicator and mounting tabs.
شکل 2: شاته view of the SEAFLO 23A Series Automatic Demand Diaphragm Pump. Displays the motor housing and mounting points.
4. ترتیب او نصب کول
Proper installation is crucial for pump performance and longevity.
4.1 پورته کول
- Mount the pump in a dry, well-ventilated area.
- Secure the pump to a solid surface using the integrated mounting tabs.
- Ensure the pump is mounted in a position that allows for easy access for maintenance and inspection.
4.2 پلمبینګ
- Use appropriate fittings (2 fittings included) for your application.
- Connect the inlet hose to the pump's inlet port (indicated by 'FLOW' arrow).
- Connect the outlet hose to the pump's outlet port.
- Ensure all plumbing connections are tight to prevent leaks and air ingress.
- Install a filter on the inlet side to protect the pump from debris.
4.3 بریښنایی پیوستون
- This pump operates on Corded Electric power. Refer to the pump label for specific voltage اړتیاوې.
- Connect the pump to a fused power supply.
- Ensure correct polarity for DC models.
- All electrical connections should be made by a qualified professional and comply with local codes.
5. عملیاتي لارښوونې
The 23A Series is an automatic demand pump, meaning it will turn on and off based on system pressure.
- پریمنګ: Once plumbing and electrical connections are complete, open a faucet or valve on the discharge side to allow air to escape. Turn on the power to the pump. The pump will begin to self-prime. Once a steady stream of water flows from the open faucet, close it. The pump will build pressure and shut off.
- اتوماتیک عملیات: The pump will automatically turn on when a demand for water is detected (e.g., opening a faucet) and turn off when the demand ceases and system pressure is restored.
- وچ چلول: The pump is capable of dry running without damage, but continuous dry running is not recommended.
6. ساتنه
منظم ساتنه د غوره فعالیت ډاډ ورکوي او د پمپ عمر اوږدوي.
- اړیکې معاینه کړئ: Periodically check all plumbing and electrical connections for tightness and signs of wear.
- د داخلي فلټر پاکول: If an inlet filter is installed, clean it regularly to prevent debris from entering the pump.
- ژمی کول: In freezing conditions, drain all water from the pump and plumbing system to prevent damage. Run non-toxic RV antifreeze through the system if necessary.
- عمومي پاکول: د پمپ بهرنۍ برخه پاکه او له خاورې او کثافاتو څخه پاکه وساتئ.
7. ستونزه حل کول
د عامو ستونزو او د هغوی د حل لارو لپاره لاندې جدول ته مراجعه وکړئ.
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| پمپ نه چالانیږي | No power; Blown fuse; Loose wiring; Faulty pressure switch | Check power supply; Replace fuse; Secure wiring; Contact support if switch is faulty. |
| ټیټ جریان یا هیڅ فشار نشته | Clogged inlet filter; Air leak in suction line; Restricted discharge line; Low voltage | Clean filter; Check all suction connections; Clear discharge line; Verify voltage. |
| پمپ په دوامداره توګه پرمخ ځي | Water leak in system; Air leak in suction line; Faulty pressure switch | Check for leaks in plumbing; Check suction connections; Contact support if switch is faulty. |
| شورماشور عملیات | Air in system; Loose mounting; Debris in pump head | Bleed air from system; Tighten mounting screws; Inspect pump head for foreign objects. |
8. مشخصات
| مشخصات | ارزښت |
|---|---|
| د ماډل شمیره | SFDP1-005-120-23A |
| Flow Rate (Open Flow) | تر 1.5 GPM پورې (5.6 LPM) |
| اعظمي فشار | 120 PSI (8.2 بار) |
| Self-Priming Capability | تر 5 فوټو پورې (1.5m) |
| د بریښنا سرچینه | د بریښنا تار شوی |
| د پنروک درجه | IP54 |
| د توکي وزن | ۲.۴۵ پونډه |
| د کڅوړې ابعاد | 7.09 x 4.13 x 2.76 انچه |
| شاملې برخې | 1 Pump, 2 fittings |
9. تضمین او ملاتړ
For warranty information and technical support, please contact SEAFLO customer service. Keep your purchase receipt as proof of purchase.
For further assistance, visit the official SEAFLO webسایټ ته مراجعه وکړئ یا خپل سیمه ایز توزیع کونکي سره اړیکه ونیسئ.
