1. پیژندنه
This manual provides essential instructions for the proper setup, operation, and maintenance of your Keeson CU380 JLDK.30.03.20 adjustable bed base remote control. Please read this manual thoroughly before use to ensure correct functionality and to prevent any issues.
۵. تنظیم او جوړه کول
2.1 د بیټرۍ نصب کول
The remote control requires 2 AAA batteries (not included). To install, slide open the battery compartment cover on the back of the remote. Insert the batteries, ensuring correct polarity (+/-). Close the battery compartment cover securely.
2.2 Remote Pairing Procedure
If your remote control is not already paired with your adjustable bed base, follow these steps:
- لومړی ګام: Disconnect the power cord of your adjustable bed base from the electrical outlet. Wait approximately 5 seconds, then plug it back into the outlet.
- لومړی ګام: Within 10 seconds of plugging in the power cord, locate the PAIR button on the back of the remote control. Press and hold this PAIR button. The button will illuminate blue and begin flashing.
- لومړی ګام: Continue holding the PAIR button until it stops flashing and the LED light on the control box of your bed base goes out. Release the PAIR button. The remote is now paired with the adjustable base.
- لومړی ګام: Test all remote functions to confirm successful pairing.
Image: Remote control pairing instructions, illustrating the steps to connect the remote to the bed base.
3. د ریموټ کنټرول چلول
The remote control provides intuitive buttons for adjusting your bed base. Familiarize yourself with the button layout and their corresponding functions:
- سر پورته/ښکته: د بستر د سر برخه تنظیموي.
- پښه پورته/ښکته: د بستر د پښې برخه تنظیموي.
- فلیټ: بستر بیرته فلیټ حالت ته راولي.
- Zero G: Activates the pre-programmed Zero Gravity position, designed to relieve pressure.
- Memory Presets (if available): Some remotes may have programmable memory buttons to save your favorite positions. Consult your bed base manual for specific instructions.
انځور: مخکینۍ برخه view of the Keeson CU380 JLDK.30.03.20 remote control, displaying buttons for head/foot adjustment, Zero G, and other functions.
4. ساتنه
4.1 د بیټرۍ بدلول
Replace batteries when the remote's response becomes sluggish or stops working. Always use new AAA batteries and dispose of old batteries responsibly.
4.2 پاکول
To clean the remote control, gently wipe it with a soft, dry cloth. Avoid using liquid cleaners or abrasive materials, as these can damage the remote's surface or internal components.
5. ستونزه حل کول
۵.۱ ریموټ ځواب نه ورکوي
- ډاډ ترلاسه کړئ چې بیټرۍ په سمه توګه نصب شوي او خالي شوي نه دي. که اړتیا وي نو بدل یې کړئ.
- Verify the remote is properly paired with the bed base by following the pairing procedure in Section 2.2.
- Check that the bed base is plugged into a functional power outlet.
5.2 د مطابقت مسلې
This remote control is specifically designed for Keeson CU380 JLDK.30.03.20 adjustable bed bases. It is not a universal remote. Before purchasing or attempting to use, ensure your bed base's control box model number matches CU380 JLDK.30.03.20.
Image: Visual guide emphasizing the importance of verifying the control box model number and comparing it with the old remote for compatibility.
6. مشخصات
- ماډل: CU380 JLDK.30.03.20
- مطابقت لرونکي وسایل: Adjustable bed base (Keeson CU380 JLDK.30.03.20)
- د بریښنا سرچینه: 2 AAA بیټرۍ (شامل ندي)
- رنګ: تور
- ځانګړې ځانګړنه: Not a universal remote
7. تضمین او ملاتړ
7.1 د تضمین معلومات
Specific warranty details for this remote control are not provided in the product information. Please refer to the documentation that came with your adjustable bed base or contact the original seller for warranty inquiries.
7.2 د پیرودونکي ملاتړ
If you encounter issues not covered in this manual or require further assistance, please contact the seller or manufacturer of your adjustable bed base. When contacting support, provide detailed information about your bed base, control box, and the remote control, including any serial numbers or model identifiers.
