دستورالعملونه+

ZIEGER 10011715

ZIEGER Crash Bar Kit Instruction Manual

Model: 10011715 for Triumph Tiger 900 GT Rally Pro (C701 | C702)

پیژندنه

This manual provides detailed instructions for the proper installation, maintenance, and safe use of your ZIEGER Crash Bar Kit. Designed specifically for the Triumph Tiger 900, GT, Rally, and Pro models (C701 | C702) from 2019 to 2024, these crash bars offer optimal protection for critical motorcycle components. Please read this manual thoroughly before beginning installation to ensure correct assembly and to prevent damage or injury.

د خوندیتوب معلومات

د بسته محتويات

مهرباني وکړئ د نصبولو دمخه تصدیق کړئ چې ټولې برخې شتون لري او زیانمن شوي ندي.

If any parts are missing or damaged, please contact ZIEGER customer support.

مطابقت

This ZIEGER Crash Bar Kit is compatible with the following motorcycle models:

مهمه یادونه: This crash bar kit is نه compatible with the Triumph Tiger 900 GT Low model.

تنظیم او نصب کول

Follow these steps carefully for proper installation. It is recommended to have a second person assist during certain stages.

اړین اوزار (شامل نه دي):

د نصبولو مرحلې:

  1. موټرسایکل چمتو کړئ: Park the motorcycle on a level, stable surface. Secure it using a center stand or appropriate paddock stands to prevent it from tipping over. Ensure the engine and exhaust are cool.
  2. د نصب کولو نقطې وپیژنئ: Locate the designated mounting points on the motorcycle frame. These typically involve existing engine mount bolts or frame attachment points. Refer to the diagrams below for visual guidance.
  3. Remove Existing Bolts (if necessary): Carefully remove any existing bolts from the identified mounting points. Work on one side of the motorcycle at a time to maintain structural integrity.
  4. Position the Crash Bar: Hold the crash bar (e.g., left side) in position, aligning its mounting holes with the frame's attachment points.
  5. د نصبولو هارډویر نصب کړئ: Insert the provided bolts, washers, and spacers as indicated in the assembly diagram. Apply a small amount of thread-locking compound to the bolt threads before insertion. Hand-tighten all bolts initially.
  6. د مخالف لوري لپاره تکرار کړئ: Follow steps 3-5 for the other side of the motorcycle, installing the second crash bar.
  7. سمون او تنظیم کول: Once both crash bars are loosely installed, ensure they are properly aligned and do not interfere with any other motorcycle components (e.g., handlebars, fairings, cables).
  8. Torque All Fasteners: Using a torque wrench, tighten all mounting bolts to the manufacturer's specified torque values. Refer to your motorcycle's service manual for specific frame bolt torque specifications, or use general torque values for the bolt size if not specified by ZIEGER. زیاتې مه کوئ.
  9. وروستۍ معاینه: Double-check all fasteners to ensure they are securely tightened. Verify that the crash bars are firmly attached and do not wobble. Start the motorcycle and check for any unusual vibrations or noises.

د نصب کولو ډیاګرامونه:

مخکی view of ZIEGER crash bar installed on a Triumph Tiger 900, showing attachment points near the engine and radiator.

شکل 1: مخامخ view of the ZIEGER crash bar installed on a Triumph Tiger 900. This image highlights the robust construction and how the bar integrates with the motorcycle's frame, providing protection to the engine and radiator area. Note the secure mounting points visible around the engine casing and lower frame.

اړخ view of ZIEGER crash bar installed on a Triumph Tiger 900, showing coverage for the engine and lower fairing.

شکل 2: اړخ view of the ZIEGER crash bar mounted on a Triumph Tiger 900. This perspective illustrates the extent of protection offered to the engine, exhaust headers, and lower fairing. The design follows the contours of the motorcycle, ensuring a secure fit and minimal aesthetic impact while maximizing protective coverage.

کارول او پاملرنه

Once installed, the ZIEGER Crash Bars require no special operation. They are designed to provide passive protection to your motorcycle's engine and frame in the event of a tip-over or low-speed slide. While robust, they are not indestructible and are intended to absorb impact energy to minimize damage to the motorcycle itself.

ساتنه

To ensure the continued effectiveness and safety of your ZIEGER Crash Bars, perform the following maintenance checks:

د ستونزو حل کول

ستونزهاحتمالي لاملد حل لاره
Crash bars feel loose or rattle.نرم نصب کولو بولټونه.Check and re-torque all mounting bolts to specifications. Apply thread-locking compound if not previously used.
Interference with other motorcycle components.د نصبولو پرمهال ناسم سمون.Loosen all mounting bolts, re-align the crash bars, and then re-tighten. Ensure no cables or hoses are pinched.
Crash bar is bent or damaged after an incident.Impact sustained.For safety and optimal protection, replace the damaged crash bar. Do not attempt to straighten or repair.

مشخصات

تضمین او ملاتړ

ZIEGER products are manufactured to high-quality standards. For warranty information, please refer to the terms and conditions provided at the point of purchase or contact your retailer. For technical support, missing parts, or any questions regarding your ZIEGER Crash Bar Kit, please contact the manufacturer:

جوړونکی: IBEX GmbH

تلیفون: +49 3501 5719730

بریښنالیک: info@ibex-parts.de

مهرباني وکړئ د ملاتړ سره د تماس نیولو پر مهال د خپل محصول ماډل شمیره (10011715) او د پیرود توضیحات چمتو ولرئ.

Documents - ZIEGER – 10011715

اړوند اسناد نشته