INVT GD10-0R7G-S2-B VFD فریکونسی AC ډرایو کارن لارښود

1. پیژندنه

This manual provides essential information for the safe and efficient operation of the INVT GD10-0R7G-S2-B Single-Phase 230V 0.75KW VFD Frequency AC Drive. The GD10 series min-economy inverters are designed for small power OEM applications, offering advanced features such as vectorization V/F control, PID function, multi-step speed control, DC braking, and Modbus communication, all within a compact design. Please read this manual thoroughly before installation, operation, or maintenance.

2. د خوندیتوب معلومات

⚠ WARNING: Risk of electric shock.

• Read this manual completely before installing or operating the device.
• Wait at least 5 minutes after disconnecting power before proceeding with any work on the unit to allow capacitors to discharge.

⚠ WARNING: Hot surfaces.

• The surfaces of the base are hot during and after operation. Do not touch the device during operation or immediately after power-off.

Only qualified personnel should perform installation, wiring, and maintenance. Ensure all local and national electrical codes are followed.

3. محصول ختم شوview

Figure 3.1: INVT GD10-0R7G-S2-B VFD Front Panel
The image displays the front panel of the INVT GD10-0R7G-S2-B VFD. It features a digital display for operational data, navigation buttons (PRG/ESC, DATA/ENT, QUICK JOG, SHIFT, UP, DOWN arrows), and dedicated RUN and STOP/RST buttons for direct control. Below the control interface, important safety warnings regarding electric shock and hot surfaces are clearly visible. The device is labeled "Goodrive10" at the bottom.

کلیدي ځانګړتیاوې:

• V/F control mode for versatile motor speed regulation.
• Natural cooling design, suitable for environments with cotton and dust, reducing maintenance needs.
• Compact, mini structure for less installation space.
• Advanced functions including vectorization V/F control, PID function, multi-step speed control, DC braking, and Modbus communication.

4. ترتیب او نصب کول

Proper installation is critical for the safe and reliable operation of the VFD.

4.1. پورته کول:

Mount the VFD in a vertical position on a flat, non-flammable surface, ensuring adequate ventilation. Maintain sufficient clearance around the unit for heat dissipation, especially given its natural cooling design.

4.2. تارونه:

Connect the input power to the designated terminals. For the GD10-0R7G-S2-B model, ensure a single-phase 230V AC power supply. Connect the motor to the output terminals. All wiring must comply with local electrical codes and standards. Use appropriate wire gauges for the rated current.

• ننوتۍ جلدtage: Single-phase 230V (±10%)
• د ننوتۍ فریکونسۍ: 50Hz or 60Hz (Allowed range: 47~63Hz)
• د محصول Voltage: د ننوت حجم سره مساويtage with deviation less than 5%
• د تولید فریکونسی: 50Hz/60Hz (Fluctuation range: 5%)

Refer to the detailed wiring diagrams in the complete product manual for specific terminal connections and safety grounding instructions.

5. عملیاتي لارښوونې

The VFD features an intuitive control panel for easy operation.

5.1. د کنټرول پینل دندې:

• ښکاره کول: Shows operational parameters such as frequency, current, voltage، او RPM.
• PRG/ESC: Enters/exits programming mode, or cancels current operation.
• DATA/ENT: Confirms parameter settings or enters data.
• ▲ (Up) / ▼ (Down): Navigates menus, adjusts parameter values.
• QUICK JOG: Initiates a quick jog operation (specific function depends on parameter settings).
• شفټ: د پیرامیټر ترمیم پرمهال د کرسر موقعیت بدلوي.
• چلول: موټور پیلوي.
• STOP/RST: موټور ودروي یا د خطا شرایط بیا تنظیموي.

5.2. لومړني عمليات:

1. Ensure the VFD is properly wired and powered on.
2. The display will show the current operating status or default frequency.
3. فشار ورکړئ چلول د موټرو د پیل کولو لپاره تڼۍ.
4. د کارولو ▲ او ▼ buttons to adjust the output frequency (and thus motor speed) if configured for panel control.
5. فشار ورکړئ ودروئ/RST د موټرو د بندولو لپاره تڼۍ.

For advanced settings, such as PID control, multi-step speed, or Modbus communication, refer to the detailed programming section of the full INVT GD10 series manual.

6. ساتنه

منظم ساتنه ستاسو د VFD اوږد عمر او غوره فعالیت تضمینوي.

• پاکول: VFD پاک او له دوړو او کثافاتو څخه پاک وساتئ. د پاکولو لپاره نرم، وچ ټوکر وکاروئ. د مایع پاکوونکو څخه کار مه اخلئ.
• وینټیلیشن: Ensure that the ventilation openings are not obstructed to allow for proper natural cooling.
• اړیکې: Periodically check all electrical connections for tightness. Loose connections can cause overheating and malfunction.
• چاپیریال: Operate the VFD within its specified environmental conditions (temperature, humidity, dust level).
• معاینه: Visually inspect the unit for any signs of damage, discoloration, or unusual odors.

Always disconnect power and wait for at least 5 minutes before performing any maintenance.

7. ستونزه حل کول

If you encounter issues with your VFD, consider the following basic troubleshooting steps:

• ځواک نشته: Check the input power supply and all circuit breakers. Ensure connections are secure.
• موټر نه چلېږي: Verify that the RUN command is active. Check motor wiring and ensure the motor is not overloaded.
• د ډیر بار سفر: Reduce the load on the motor. Check for mechanical issues with the motor or driven equipment. The VFD has an overload capability of 150% of rated current for 1 minute.
• غیر معمولي شور/لړزښت: Check motor mounting, coupling, and VFD installation.
• د ښودلو تېروتنې: If the display shows an error code, consult the comprehensive INVT GD10 series manual for specific fault code definitions and corrective actions.

If the problem persists after basic troubleshooting, contact qualified technical support. Do not attempt to repair the unit yourself.

8. مشخصات

8.1. Rated Specifications (Single-Phase 230V GD10 Series)

8.2. تخنیکي مشخصات

• د کنټرول حالت: V/f کنټرول
• Maximum Output Frequency: 200Hz
• Adjustable-Speed Ratio: 0.111111111
• د اوورلوډ وړتیا: د 150 دقیقې لپاره 1٪ درجه شوي اوسني
• Analog Input Resolution: <=20mV
• Digital Input Resolution: <= 2ms
• Analog Input/Output: Input 0-10V or 0-20mA, Output 0-10V

8.3. فزیکي توضیحات

• د بسته ابعاد: 1.18 x 0.79 x 0.39 انچه
• د توکي وزن: ۰.۹۸۶ اونس (۲۷.۹۴ ګرامه)
• د موډل نوم: EFZRZYJ
• جوړونکی: EFZRZYJ

9. تضمین او ملاتړ

For information regarding product warranty, please refer to the warranty card included with your purchase or contact the seller directly.

For technical support, troubleshooting assistance beyond this manual, or spare parts inquiries, please contact the manufacturer or your authorized distributor. Provide your product model number (GD10-0R7G-S2-B) and serial number (if applicable) when seeking support.