JUBEST 42x96

JUBEST 42x96 Pocket Door Frame Kit Instruction Manual

ماډل: ۱۲۰۰۱۰x۲

پیژندنه

This manual provides detailed instructions for the installation, operation, and maintenance of your JUBEST 42x96 Pocket Door Frame Kit. This kit is designed for creating a space-saving pocket door system within a 2x4 stud wall, accommodating doors with a width of 24" to 42" and a height of 96". It features a 220 lbs capacity and a soft-close mechanism for smooth and quiet operation.

JUBEST Pocket Door Frame Kit installed with a wooden door, showing soft close, long lasting, and customizable features.

Image: The JUBEST Pocket Door Frame Kit in an installed setting, highlighting its key operational features.

تنظیم او نصب کول

Careful installation is crucial for optimal performance of your pocket door system. Please review د پیل څخه مخکې ټول ګامونه.

د بسته محتويات

All components of the JUBEST Pocket Door Frame Kit laid out, including the track, hangers, soft close mechanism, and fasteners.

انځور: یو بشپړ اوورview of all components included in the JUBEST Pocket Door Frame Kit.

  • 4 x Square Uprights (Galvanized Steel Tube Studs)
  • 1 x Aluminum Track with Wood Slot (Pine wood header)
  • 1 x Double-Sided Soft Close Mechanism
  • 2 x Hangers with Mounting Plates
  • 2 x Column Bases
  • 1 x Door Guide
  • 2 x Floor Adjustable Anchors
  • Assorted Fasteners and Tools (e.g., wrench, hex key)
چاودنه وشوه view of the JUBEST Pocket Door Frame Kit components, showing how they fit together.

Image: An exploded diagram illustrating the assembly of the pocket door frame components.

د نصبولو کلیدي نظرونه

  1. سخت خلاصول: Ensure your rough opening width is 2x the door width plus 1 inch. The steel frame is designed for a 96" door height.
  2. Track Customization: The aluminum track can be cut to fit door panel widths from 24" to 42".
  3. Stud Wall Compatibility: This kit is designed for 2x4 stud walls.
  4. Door Panel Requirements: Suitable for door panel thickness from 1" to 1-3/4".
  5. Header Strength: The one-piece pine wood header provides enhanced strength.
  6. Adjusting for Shorter Doors: If your door is shorter than 96", the header can be lowered, and the bottom ends of the steel split tubes can be cut to size.
  7. د نرم بندولو میکانیزم: Install the double-sided soft close mechanism carefully. It is designed to dampen both opening and closing actions.
  8. Pre-Drywall Testing: It is highly recommended to install your door and test the soft-close mechanism's engagement points before installing drywall. Adjustments to the soft-close mechanism's position may be difficult or impossible once drywall is in place.
JUBEST Pocket Door Frame Kit installed within a wooden stud wall, showing the door partially open.

Image: The pocket door frame integrated into a stud wall, demonstrating its structural placement.

Double Pocket Door Configuration

To create a double pocket door system, you will need two JUBEST Pocket Door Frame Kits and a compatible adapter (sold separately). This allows two doors to slide into the wall cavity from opposite directions.

Illustration of a double pocket door setup, showing two doors sliding into a central wall cavity.

Image: A visual representation of how two pocket door frames can be combined for a double door installation.

عملیاتي لارښوونې

The JUBEST Pocket Door Frame Kit is designed for smooth and quiet operation, primarily due to its soft-close mechanism.

د نرم بند میکانیزم

The integrated double-sided soft close mechanism ensures that the door slows down and gently closes or opens into its final position, preventing slamming and reducing wear. This mechanism is rated for doors up to 220 lbs.

تړل view of the double-sided soft-close mechanism and the three-wheel ball bearing hanger.

انځور: تفصیلي view of the soft-close component and door hanger, illustrating their function.

د عملیاتو یادونه:

The soft-close mechanism requires a certain amount of force to initiate the door's movement from its fully closed or fully open position. This is a characteristic of the dampening system. Users, particularly young children or individuals with limited strength, may find that more effort is needed to pull the door out of the pocket or push it fully into the pocket against the soft-close resistance.

ساتنه

To ensure the longevity and smooth operation of your JUBEST Pocket Door Frame Kit, periodic maintenance is recommended:

  • د لارو پاکول: Periodically inspect the aluminum track for any debris, dust, or obstructions. Use a soft brush or vacuum cleaner to remove any buildup that could impede the rollers.
  • د رولر معاینه: Check the door hangers and rollers for smooth movement. If any resistance is felt, ensure the track is clean. Lubrication is generally not required for the sealed ball bearings.
  • د تړلو چک: Over time, vibrations can loosen fasteners. Periodically check all visible screws and bolts, especially those securing the track and hangers, and tighten them if necessary.

د ستونزو حل کول

Door is difficult to open or close (Soft-Close related)

  • Expected Resistance: The soft-close mechanism is designed to provide resistance for a controlled stop. A certain amount of force is normal to overcome this dampening effect when initiating movement.
  • Pre-Drywall Adjustment: If the resistance is excessive or the soft-close engages too early/late, adjustments to the soft-close mechanism's position on the track may be required. This adjustment is best performed before drywall installation, as access is limited afterward.
  • خنډونه: Check the track for any debris or obstructions that might be hindering the rollers.

Rollers are noisy

  • د ټریک پاکوالی: Ensure the aluminum track is clean and free of dust or small particles that could cause friction with the rollers.
  • Hanger Alignment: Verify that the door hangers are properly aligned and seated in the track. Misalignment can cause uneven wear and noise.
  • د برخې زیان: Inspect the rollers and hangers for any signs of damage or wear. If components are damaged, contact customer support for replacements.

Door Latch Issues

  • مطابقت: The pocket door frame kit does not include a door latch. Standard door latches may not be compatible with all door types or pocket door installations. You may need to source a specific pocket door latch mechanism that fits your door and frame configuration.

مشخصات

ماډل42x96
Maximum Door Weight Capacity220 پونډه
Compatible Door Panel Thickness1" to 1-3/4"
Compatible Door Panel Width24" to 42" (track can be cut)
Compatible Door Panel Height96" (frame height)
د دیوال ډول مطابقت2x4 Stud Wall
Stud MaterialGalvanized Steel Tube
د سر موادOne-piece Pine Wood
د توکي وزن۲.۴۵ پونډه
د کڅوړې ابعاد101.25 x 8 x 3 انچه
رنګسره زر
Diagram showing maximum track length, compatible door widths and thicknesses, steel frame height, rough opening width, and weight capacity.

Image: A diagram outlining the key dimensions and weight capacity of the pocket door frame kit.

د پیرودونکي ملاتړ

JUBEST is committed to customer satisfaction. If you encounter any issues during installation, operation, or have questions regarding your pocket door frame kit, please contact our professional customer service team. They are available to assist you with problem resolution and technical guidance.

For support, please refer to the contact information provided with your purchase or visit the official JUBEST webسایټ

اړوند اسناد - 42x96

مخکېview JUBEST TSQALW03-W34 Sliding Pocket Door Frame Kit Installation Manual
Detailed installation guide for the JUBEST TSQALW03-W34 sliding pocket door frame kit, including component lists, pre-installation steps, cutting instructions, and assembly procedures.
مخکېview TSQAL22-38IN د پټ شوي بارن دروازې هارډویر نصبولو لارښود
د JUBEST TSQAL22-38IN پټ شوي بارن دروازې هارډویر کټ لپاره د نصب کولو تفصيلي لارښود، چې د نرم بند میکانیزم او په دیوال کې نصب شوي غیر مرئی سلایډینګ ټریک لري. د 42 انچو دروازو لپاره د اجزاو لیست، د چمتووالي مرحلې، او د راټولولو لارښوونې پکې شاملې دي.
مخکېview د JUBEST 42x84 انچه پټ بارن دروازې نصبولو لارښود
د JUBEST 42x84 انچه پټ بارن دروازې هارډویر سیسټم لپاره جامع نصب لارښود. د پرزو تفصيلي لیست، اړین وسایل، او ګام په ګام لارښوونې پکې شاملې دي چې د اسانه راټولولو لپاره په متن کې تشریح شوي ډیاګرامونو سره.
مخکېview JUBEST MSD03-60x80IN Sliding Mirror Closet Door Installation Manual
Comprehensive installation manual for the JUBEST MSD03-60x80IN sliding mirror closet door system. Includes package contents, hardware details, step-by-step assembly instructions, and care guidelines.
مخکېview د ۳۶x۸۴ انچه پټې کوټې دروازې د نصبولو لارښود - JUBEST
د JUBEST 30x84 انچه پټ بارن دروازې هارډویر کټ لپاره د ګام په ګام نصبولو لارښود، پشمول د اړتیا وړ وسایلو، د پرزو لیست، او د نصبولو لارښوونې.
مخکېview JUBEST MYSD2P-36x84IN+MYSD2P-36x84IN-HD د بارن دروازې هارډویر کټ نصبولو لارښود
د JUBEST MYSD2P-36x84IN+MYSD2P-36x84IN-HD د بارن دروازې هارډویر کټ لپاره د نصبولو تفصيلي لارښود، د اجزاو پیژندنه، اړین وسایل، او د مختلفو دیوال ډولونو لپاره د ګام په ګام د نصبولو لارښوونې پوښي.