KPS Electrical Safety Starter Kit User Manual

1. پیژندنه

This manual provides detailed instructions for the safe and effective use of the KPS Electrical Safety Starter Kit, which includes the DT10 Non-Contact Voltage Detector and the CC810 GFCI Socket Tester. These tools are designed to assist in verifying electrical presence and proper wiring in residential and light commercial applications. Please read this manual thoroughly before operation and retain it for future reference.

Image 1.1: The KPS Electrical Safety Starter Kit, featuring the green pen-style DT10 Non-Contact Voltage Detector and the green plug-in CC810 GFCI Socket Tester.

۱.۱. د خوندیتوب مهم معلومات

Always adhere to local and national safety codes. Failure to follow these safety instructions may result in electric shock, fire, or serious injury.

• Do not use the devices if they appear damaged or are not operating correctly.
• Verify the tester's operation on a known live circuit before and after use.
• د برېښنا سره د کار کولو پر مهال تل مناسب شخصي محافظتي تجهیزات (PPE) واغوندئ.
• د حجم اندازه کولو هڅه مه کوئtages exceeding the specified maximum ratings.
• Keep hands and fingers away from the probe tip of the voltage detector and the prongs of the socket tester during operation.
• These tools are for testing purposes only and are not intended for continuous monitoring.

3. DT10 Non-Contact Voltagای کشف کونکی

3.1 ځانګړتیاوې

• د غیر تماس کشف د AC voltage.
• د AC حجم کشف کويtage له 90V څخه 1000V ته.
• Audible and LED visual alerts for voltage شتون.
• Compact, pen-style design with pocket clip.
• Rated to CAT II 1000V for residential environments.

Image 3.1: Visual representation of key features for both the DT10 Non-Contact Voltage Detector (left) and the CC810 GFCI Socket Tester (right). The DT10 detects AC voltage from 90-1000V with audible and LED indication.

3.2 عملیات

1. پاور آن: Press the power button to turn on the detector. The LED indicator should illuminate, confirming the device is active.
2. د ځان ازموینه: Test the detector on a known live circuit (e.g., a working wall outlet) to ensure it is functioning correctly. The LED should flash and an audible beep should sound.
3. د حجم کشفtage: Place the tip of the detector near the conductor, outlet, or circuit you wish to test.
4. اشاره: که AC voltage is detected, the LED will flash and an audible alarm will sound. The frequency of the flashes and beeps may increase with higher voltage or closer proximity to the source.
5. بندول: Press the power button again to turn off the detector. It may also feature an auto-off function after a period of inactivity.

3.3 Specifications (DT10)

• والیtagد لړيو: له 90V څخه تر 1000V AC پورې
• د فریکونسی رینج: 50/60 Hz
• د خوندیتوب درجه: CAT II 1000V
• د بریښنا سرچینه: 2 x AAA بیټرۍ (شامل ندي)

4. CC810 GFCI Socket Tester

4.1 ځانګړتیاوې

• Tests 125V AC outlets for common wiring faults.
• د روښانه نیمګړتیاو پیژندنې لپاره د LED شاخصونه.
• Integrated GFCI test button to verify GFCI functionality.
• کمپیکٹ او دوامدار ډیزاین.
• Rated to CAT II 125V for residential environments.

4.2 عملیات

1. Insert Tester: Plug the CC810 into a standard 3-prong 125V AC outlet.
2. شاخصونه وګورئ: The LED indicators on the tester will illuminate to show the wiring status of the outlet. Refer to the 'Interpreting Indicators' section for details.
3. GFCI Test (if applicable): For GFCI-protected outlets, press the GFCI test button on the tester. A working GFCI outlet should trip, cutting power to the outlet.
4. Reset GFCI: If the GFCI trips, reset it at the outlet or circuit breaker.
5. Remove Tester: Unplug the tester from the outlet after completing the test.

۵.۳ د تشریح شاخصونه

The CC810 uses a combination of three LED lights to indicate the wiring status of the outlet. Refer to the legend on the device or the table below:

4.4 GFCI Test

To test a Ground Fault Circuit Interrupter (GFCI) protected outlet:

1. Plug the CC810 into the GFCI outlet. Ensure the wiring status indicates 'Correct Wiring'.
2. Press the red GFCI test button on the CC810.
3. A functional GFCI should trip, cutting power to the outlet. The lights on the CC810 will turn off.
4. If the GFCI does not trip, it may be faulty and should be replaced by a qualified electrician.
5. Reset the GFCI by pressing its 'RESET' button or resetting the corresponding circuit breaker.

4.5 Specifications (CC810)

• د عملیاتو Voltage: 125V AC
• د فریکونسی رینج: 50/60 Hz
• د خوندیتوب درجه: CAT II 125V

5. غوښتنلیکونه

The KPS Electrical Safety Starter Kit is suitable for various electrical testing scenarios:

• Residential Wiring: Ideal for identifying faulty outlets and circuit problems in homes.
• Commercial Electrical Maintenance: Useful for electrical inspections and troubleshooting in commercial settings.
• Industrial Troubleshooting: Can be used for basic testing of machinery, circuits, and panels in industrial environments.

Image 5.1: Depiction of various applications for the KPS Electrical Safety Starter Kit, including residential wiring, commercial electrical maintenance, and industrial troubleshooting.

6. ساتنه

• پاکول: Wipe the devices with a dry, clean cloth. Do not use abrasive cleaners or solvents.
• Battery Replacement (DT10): When the DT10's indicator light becomes dim or fails to illuminate, replace the AAA batteries. Ensure correct polarity.
• ذخیره کول: Store the tools in a cool, dry place, away from direct sunlight and extreme temperatures.

7. ستونزه حل کول

8. د تضمین معلومات

KPS products are manufactured to high-quality standards. This product is covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official KPS webسایټ

9. د پیرودونکي ملاتړ

For technical assistance, product inquiries, or warranty claims, please contact KPS customer support. You can find contact information and additional resources by visiting the KPS Store on Amazon or the official KPS webسایټ