ECOELER 6-Inch Motion Sensor LED Ceiling Light

1. پیژندنه

Thank you for choosing the ECOELER 6-Inch Motion Sensor LED Ceiling Light. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and retain it for future reference.

انځور 1.1: مخکی view of the ECOELER 6-Inch Motion Sensor LED Ceiling Light.

2. د خوندیتوب معلومات

د اور، بریښنا شاک، یا شخصي ټپي کیدو خطر کمولو لپاره، تل د خوندیتوب دا اساسي احتیاطي تدابیر تعقیب کړئ:

• خبرداری: د بریښنا شاک خطر. د نصب یا خدمت کولو دمخه په فیوز یا سرکټ بریکر کې بریښنا قطع کړئ.
• دا محصول باید د پلي شوي نصب کولو کوډ سره سم د هغه چا لخوا نصب شي چې د محصول ساختماني او عملیاتو او پکې شامل خطرونو سره آشنا وي.
• Use only 120V AC, 60Hz circuits.
• Do not attempt to disassemble or modify the fixture. There are no user-serviceable parts inside.
• ډاډ ترلاسه کړئ چې ټولې اړیکې خوندي او په سمه توګه موصل شوي دي.
• دا فکسچر یوازې د داخلي کارونې لپاره مناسب دی.

3. د بسته محتويات

د نصبولو پیل کولو دمخه ډاډ ترلاسه کړئ چې ټولې برخې شتون لري:

• 6-Inch Black Motion Sensor LED Ceiling Light (x1)
• د نصبولو هارډویر (پیچونه، د تار مغز)
• E26 Adapter Accessories (for recessed can installation)
• د لارښود لارښود (دا سند)

Image 3.1: Included accessories for installation.

4. د محصول ب Featuresې

• 3CCT د انتخاب وړ: Choose between 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight) color temperatures.
• د حرکت سینسر: Passive Infrared (PIR) sensor detects motion within 9-16 feet.
• د تنظیم وړ وخت ځنډ: Set the light to remain on for 30 seconds, 1 minute, or 5 minutes after motion ceases.
• د رڼا سینسر: The motion sensor functions only in dark environments, remaining off during daylight hours.
• د انرژي موثریت: 16W LED provides 1000 lumens of brightness.
• څو اړخیز نصب: Compatible with 3.5 or 4-inch junction boxes and 5 or 6-inch recessed cans.

Image 4.1: Key features including PIR sensor, 3CCT, and time delay settings.

5. ترتیب او نصب کول

Before installation, ensure the power supply is turned off at the circuit breaker.

5.1. Junction Box Installation

1. لینز د ساعت په لور په حرکت کولو سره لرې کړئ.
2. Connect the supply wires to the fixture wires using the provided wire nuts: black to black (live), white to white (neutral), and green/bare copper to green (ground).
3. Attach the fixture base to the junction box using the provided screws.
4. Twist the lens counter-clockwise to secure it back onto the fixture.

5.2. Recessed Can Installation

1. لینز د ساعت په لور په حرکت کولو سره لرې کړئ.
2. Install the spring clips onto the fixture base using screws.
3. Connect the E26 adapter to the existing socket in the recessed can.
4. Connect the fixture wires to the E26 adapter wires using wire nuts.
5. Push the disk light into the recessed can until the spring clips secure it.
6. Twist the lens counter-clockwise to secure it back onto the fixture.

Image 5.1: Installation diagrams for junction box and recessed can.

6. عملیاتي لارښوونې

After successful installation and restoring power, the light will be ready for operation. The ECOELER motion sensor light operates automatically based on ambient light and motion detection.

6.1. Motion Sensor Functionality

• د ورځې وخت: The light remains off even if motion is detected, due to the integrated light sensor.
• Nighttime/Dark Environments: The light will automatically turn on when motion is sensed within its detection range (approximately 9-16 feet).
• The light will turn off after the set time delay if no further motion is detected.

Image 6.1: Motion sensor operation during day and night.

6.2. Color Temperature (CCT) Adjustment

The fixture offers three color temperature options: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). To adjust the CCT:

1. ډاډ ترلاسه کړئ چې بریښنا بنده ده.
2. Carefully remove the lens by twisting it clockwise.
3. Locate the CCT selector switch on the LED board (refer to Image 4.1).
4. Slide the switch to your desired color temperature setting (3000K, 4000K, or 5000K).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.2: Visual representation of 3CCT options.

6.3. Time Delay Adjustment

The light can be set to remain on for 30 seconds, 1 minute, or 5 minutes after motion is no longer detected. To adjust the time delay:

1. ډاډ ترلاسه کړئ چې بریښنا بنده ده.
2. Carefully remove the lens by twisting it clockwise.
3. Locate the time delay selector switch on the fixture (refer to Image 4.1).
4. Slide the switch to your desired time setting (30s, 1min, or 5mins).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.3: Time delay countdown feature.

7. ساتنه

The ECOELER LED ceiling light requires minimal maintenance.

• پاکول: د پاکولو دمخه ډاډ ترلاسه کړئ چې بریښنا بنده ده. فکسچر د نرم، وچ یا لږ څه ډنډ سره پاک کړئamp ټوکر. سخت کیمیاوي مواد یا د کثافاتو پاکوونکي مه کاروئ، ځکه چې دوی ممکن پای یا بریښنایی اجزاو ته زیان ورسوي.
• لینز: Keep the lens clean to ensure optimal light output and motion sensor performance.

8. ستونزه حل کول

If you experience issues with your ECOELER LED ceiling light, refer to the following common problems and solutions:

9. مشخصات

10. تضمین او ملاتړ

This ECOELER product is backed by a Limited Warranty. For specific warranty details and duration, please refer to the documentation included with your purchase or contact ECOELER customer support.

For technical assistance, troubleshooting, or warranty claims, please contact ECOELER customer support through the retailer where the product was purchased or visit the official ECOELER webسایټ

جوړونکی: ECOELER ELECTRIC INC