Elitech Digital Manifold Gauge Set DMG-2SE Instruction Manual

پیژندنه

This manual provides comprehensive instructions for the safe and efficient operation, setup, and maintenance of the Elitech Digital Manifold Gauge Set, model DMG-2SE. This device is designed for precise measurement of pressure and temperature in HVAC, refrigeration, and air conditioning systems. Please read this manual thoroughly before use to ensure proper functionality and safety.

د خوندیتوب معلومات

Always wear appropriate personal protective equipment (PPE), including safety glasses and gloves, when handling refrigerants.
Ensure all hose connections are secure and leak-free before applying pressure or vacuum to a system.
Do not exceed the maximum working pressure of the hoses (500 PSI) or the gauge (800 PSI). Exceeding these limits can cause equipment damage or personal injury.
Use the device in a well-ventilated area to prevent the accumulation of refrigerant vapors.
Refer to local and national regulations for proper refrigerant handling, recovery, and disposal procedures.
Keep the device away from moisture, direct sunlight, and extreme temperatures to prevent damage to electronic components.
د وسیلې د جلا کولو یا بدلولو هڅه مه کوئ. ټولې خدمتونه وړ پرسونل ته راجع کړئ.

محصول پای ته ورسیدview او اجزا

The Elitech DMG-2SE is a digital manifold gauge designed for HVAC/R professionals, offering accurate pressure and temperature measurements. It features a high-definition LCD screen, intuitive controls, and robust construction for reliable performance.

Elitech Digital Manifold Gauge Set DMG-2SE with refrigerant hoses — *Figure 1: Elitech Digital Manifold Gauge Set DMG-2SE with included refrigerant charging hoses.*

Key features of Elitech DMG-2SE including 88 refrigerant types, real-time pressure, multi-unit toggle, observation window, refrigerant charge/recovery, 1% accuracy, rugged design, and 200H battery life. — شکل 2: پایview of key features including support for 88 refrigerant types, real-time pressure and saturation temperature display, multi-unit toggle, observation window, refrigerant charge/recovery functions, ±1% accuracy, rugged design, and 200-hour battery life.

Diagram of Elitech DMG-2SE showing LCD display, control buttons, valve knobs, refrigerant hose connection ports, sight glass, battery compartment, information label, and hanging mount. — Figure 3: Labeled diagram of the DMG-2SE showing the LCD display, control buttons, valve knobs, refrigerant hose connection ports (1/4" SAE), sight glass, battery compartment, information label, and hanging mount.

د یخولو هوزونه

The included refrigerant charging hoses are color-coded for easy identification and proper connection.

Three refrigerant charging hoses in red, yellow, and blue, each 59 inches long with 1/4 inch SAE screw threads. — *Figure 4: The included 59-inch (1.5m) refrigerant charging hoses with 1/4" SAE screw threads.*

Close-up of refrigerant hose connections, indicating red for high pressure, blue for low pressure, and yellow for refrigerant. — *Figure 5: Color coding for refrigerant hoses: Red for high pressure, Blue for low pressure, and Yellow for refrigerant.*

مشخصات

د فشار سلسله: -۱۲ څخه تر ۱۵۰ psi پورې
دقت: ±1% FS (Full Scale)
قرارداد: 1 psi
د فشار واحدونه: psi, kg/cm², kPa, MPa, bar, inHg
د تودوخې واحدونه: ° سي / ° ف
مناسب یخچالونه: Supports 88 types (e.g., R11, R12, R22, R134a, R410a, R404a, R407c, R507, R32, R290, R600a, R1234yf, etc.). The device defaults to 18 types and can be updated via an app.
د نلی اوږدوالی: 59 انچه (1.5m)
د نلی پیوستون: ۱/۴" SAE
Hose Working Pressure: 500 PSI (Yellow, Blue, Red)
Hose Burst Pressure: 4000 PSI (Yellow, Blue, Red)
ځواک: 2 x AAA batteries (replaceable)
د بیټرۍ ژوند: تقریبا 200 ساعته
ابعاد: Approximately 4.3 inches (11 cm) width, 5.3 inches (13.5 cm) height, 2.9 inches (7.4 cm) depth.
وزن: تقریبا ۱.۱۹ پونډه (۵۴۰ ګرامه)

چمتو کول

د بیټرۍ نصب کول: Open the battery compartment located on the back of the unit. Insert two AAA batteries, ensuring correct polarity (+/-). Close the compartment securely.
ابتدايي بریښنا فعاله: د بریښنا ت buttonۍ فشار کړئ (U symbol) to turn on the device. The LCD screen will illuminate.
د واحد انتخاب: Use the "MODE" button to cycle through available measurement units (psi, kg/cm², kPa, MPa, bar, inHg for pressure; °C/°F for temperature). Select your preferred units by stopping on the desired option.
Refrigerant Selection: Press the "MODE" button repeatedly until the refrigerant type (e.g., R134a) flashes on the display. Use the up/down arrow buttons to scroll through the list of supported refrigerants. Confirm your selection by pressing "MODE" again or by waiting a few seconds for the selection to auto-confirm.
Zeroing the Pressure: Before connecting the gauge to any system, ensure it is at atmospheric pressure (not connected to any pressure source). Press the "ZERO" button to calibrate the pressure reading to zero. This ensures accurate measurements.

عملیاتي لارښوونې

د هوزونو نښلول

سره وصل کړئ blue hose to the low-pressure service port of the HVAC/R system.
سره وصل کړئ red hose to the high-pressure service port of the HVAC/R system.
سره وصل کړئ yellow hose to the service port of your vacuum pump, refrigerant tank, or recovery machine.
Ensure all connections are hand-tightened, then slightly snugged with a wrench to prevent refrigerant leaks.

د فشار او تودوخې اندازه کول

With the hoses connected to the system, slowly open the appropriate valve knobs on the manifold gauge to allow system pressure to reach the internal sensors.
The LCD will display real-time pressure readings for both the high and low sides of the system.
Simultaneously, the display will show the corresponding saturation temperatures (evaporation and condensation temperatures) for the currently selected refrigerant.
The "PT" (Pressure-Temperature) mode shows pressure and saturation temperature. "Ev" (Evaporation) and "Co" (Condensation) indicate the saturation temperatures, while "PL" (Low Pressure) and "PH" (High Pressure) indicate the actual system pressures.

Close-up of the Elitech DMG-2SE digital display showing pressure and temperature readings for R134a refrigerant. — *شکل 6: مثالample of the digital display showing pressure and saturation temperature readings.*

Refrigerant Charging/Recovery

The DMG-2SE provides accurate pressure readings essential for refrigerant charging and recovery processes. Always follow industry best practices and local regulations for these operations.

د چارج کولو لپاره: Connect the yellow hose to the refrigerant tank. Purge any air from the yellow hose before opening the manifold valve to the system. Monitor the pressure readings on the DMG-2SE to ensure the correct charge is added.
For Recovery: Connect the yellow hose to a certified refrigerant recovery machine. Follow the recovery unit's instructions and monitor system pressures on the DMG-2SE during the recovery process.

ساتنه

پاکول: وسیله په نرمۍ سره مسح کړئ، دamp cloth. Do not use abrasive cleaners, solvents, or immerse the unit in water.
د بیټرۍ بدلول: Replace batteries when the low battery indicator appears on the display. Ensure the device is powered off before opening the battery compartment and replacing the two AAA batteries.
د نلی معاینه: Regularly inspect all refrigerant hoses for signs of wear, cracks, cuts, or damage. Replace damaged hoses immediately to prevent refrigerant leaks and ensure safety.
ذخیره کول: Store the manifold gauge set in a clean, dry place, away from direct sunlight, extreme temperatures, and corrosive environments.

د ستونزو حل کول

ستونزه	احتمالي لامل	د حل لاره
وسیله فعاله نه ده	مړه یا په غلط ډول نصب شوي بیټرۍ	بیټرۍ بدل کړئ، د سم قطبیت ډاډ ترلاسه کړئ.
د فشار ناسم لوستل	Gauge not zeroed; Leaking connections; Incorrect refrigerant selected	Zero the gauge before use. Check all hose connections for leaks. Verify the correct refrigerant type is selected.
Display shows "Err"	Sensor error or measurement out of range	Power off and restart the device. If the error persists, contact customer support.

تضمین او ملاتړ

For detailed warranty information, technical support, or service inquiries regarding your Elitech Digital Manifold Gauge Set DMG-2SE, please contact Elitech customer service. Refer to the product packaging or the official Elitech webد اړیکو د تازه جزئیاتو او ملاتړ سرچینو لپاره سایټ.

ایلیټیک Webسایټ: www.elitech.com

	د ایلیټیک MS-100 پلس سمارټ ډیجیټل مینیفولډ ګیج کارونکي لارښود د ایلیټیک MS-100 پلس سمارټ ډیجیټل مینیفولډ ګیج لپاره جامع کارونکي لارښود، د محصول معرفي، د خوندیتوب لارښوونې، او نور پوښښ کوي.view، د تڼۍ دندې، تخنیکي پیرامیټرې، او د یخچال او HVAC سیسټمونو لپاره د چټک عملیاتو لارښوونې.
	د ایلیټیک ایم ایس-۱۰۰ ډیجیټل مینیفولډ ګیج: ځانګړتیاوې، عملیات، او مشخصات د ایلیټیک MS-100 ډیجیټل مینیفولډ ګیج لپاره جامع لارښود، چې د هغې ځانګړتیاوې، چټک عملیات، تخنیکي مشخصات، احتیاطي تدابیر، او د HVAC او یخچال سیسټمونو لپاره د محصول توضیحات پوښي.
	د ایلیټیک MS-800 لړۍ ډیجیټل مینیفولډ ګیج کارونکي لارښود او مشخصات د ایلیټیک MS-800 لړۍ ډیجیټل مینفولډ وسیلې لپاره جامع کارونکي لارښود، چې د محصول پیژندنه، د خوندیتوب لارښوونې، د چاپیریال ساتنه، تفصيلي مشخصات، او د فشار او تودوخې اندازه کولو لپاره د چټک عملیاتي لارښوونې، د فشار ازموینې، او د HVAC او یخچال سیسټمونو لپاره د یخچال چارج کولو پوښښ کوي.
	د ایلیټیک ایم ایس لړۍ ډیجیټل مینیفولډ ګیج کارونکي لارښود د ایلیټیک ایم ایس لړۍ ډیجیټل مینفولډ ګیج لپاره د کارونکي لارښود، د محصول توضیحات پوښي، عمومي اوورview، د تڼۍ دندې، مشخصات، د چټک پیل لارښود، د عملیاتو مرحلې، هوښیار غوښتنلیکونه، او ساتنه.
	Elitech MS-100 ډیجیټل مینیفولډ ګیج کارن لارښود د ایلیټیک MS-100 ډیجیټل مینیفولډ ګیج لپاره د کارونکي لارښود، د هغې ځانګړتیاوې، عملیات، مشخصات، او ساتنه په تفصیل سره بیانوي.
	د ایلیټیک MS-100 ډیجیټل مینیفولډ: د کارونکي لارښود او مشخصات د ایلیټیک MS-100 ډیجیټل مینفولډ لپاره جامع لارښود، چې د هغې ځانګړتیاوې، تخنیکي مشخصات، عملیات، د خوندیتوب لارښوونې، او د ستونزو حل کول پوښي. د ایلیټیک وسیلو ایپ سره د فشار او تودوخې اندازه کولو، لیک ازموینې، ویکیوم پروسو، او ډیټا لاګ کولو لپاره د وسیلې کارولو څرنګوالی زده کړئ.

Elitech DMG-2SE