BRITA P1000 3-Way Integrated Water Filtration System

پیژندنه

The BRITA P1000 3-Way Integrated Water Filtration System offers a convenient and sustainable solution for accessing filtered, cold, and hot water directly from a single tap. This system features high-quality BRITA filtration, capable of processing up to 1,200 liters, effectively reducing chlorine, limescale, and other impurities to enhance water taste and protect your appliances. Its premium stainless steel design provides both functionality and an elegant aesthetic for any modern kitchen.

Image: The BRITA P1000 3-Way Integrated Water Filtration System, showcasing the sleek stainless steel tap and the compact P1000 filter unit.

د خوندیتوب معلومات

Please read all safety instructions carefully before installation and use. Failure to follow these instructions may result in property damage or personal injury.

• تل د نصب یا ساتنې له پیل کولو دمخه د اوبو اصلي رسولو بند کړئ.
• Ensure all connections are tight to prevent leaks. Check for leaks periodically after installation.
• This system is designed for use with high-pressure boilers (2-8.6 bar). Do not use with low-pressure systems.
• د هغه اوبو سره مه کاروئ چې د مایکروبیولوژیکي پلوه ناامنه وي یا د نامعلوم کیفیت لرونکي وي پرته لدې چې د سیسټم دمخه یا وروسته مناسب غیر منتن کول.
• Keep the filter unit away from direct heat sources and freezing temperatures.
• Only use genuine BRITA replacement filters to ensure optimal performance and safety.

د بسته محتويات

د نصبولو پیل کولو دمخه ډاډ ترلاسه کړئ چې ټولې برخې شتون لري:

• BRITA 3-Way Tap (Square Style, Stainless Steel)
• BRITA P1000 Filter Cartridge
• Filter Head with Smart Filter Change Indicator (LED)
• Mounting Accessories (hoses, connectors, seals, etc.)

Image: A selection of tools and components typically included or required for the installation of the BRITA 3-Way Integrated Water Filtration System.

تنظیم او نصب کول

The BRITA P1000 3-Way Integrated Water Filtration System is designed for easy installation under the sink, fitting most kitchens without the need for countertop drilling or electrical connection. Follow these steps for a successful setup:

1. د نصب کولو ساحه چمتو کړئ: Ensure you have sufficient space under your sink. The system requires a mounting hole of ø 35 mm and a minimum distance of 60 mm to the rear wall.
2. د اوبو رسولو بندول: Locate and turn off the main water supply to your kitchen sink.
3. نل نصب کړئ: Insert the 3-way tap into the designated hole on your countertop. Secure it from underneath using the provided mounting accessories.
4. د اوبو نلونه وصل کړئ: Connect the hot and cold water supply lines to the corresponding inlets on the tap. Connect the filtered water line from the tap to the filter head.
5. Install the Filter Head: Secure the filter head to the cabinet wall under the sink. Ensure it is easily accessible for filter changes.
6. Insert the P1000 Filter: Insert the BRITA P1000 filter cartridge into the filter head.
7. Turn On Water Supply & Flush: Slowly turn the main water supply back on. Open the filtered water tap and let the water run for at least 3 minutes to flush the system and remove any air or carbon fines. Check all connections for leaks.

د بصري لارښود لپاره، مهرباني وکړئ لاندې د نصبولو ویډیو وګورئ:

Visual aids for installation:

Image: An illustration showing the BRITA P1000 filter unit installed neatly under a kitchen sink, connected to the tap and water supply lines.

Image: A diagram illustrating the connection points of the BRITA filter head and cartridge to the water supply and the 3-way tap under the sink.

Image: A technical drawing showing the dimensions of the BRITA 3-Way Tap, including height, width, base ring diameter, and mounting hole size, crucial for planning installation.

عملیاتي لارښوونې

Your BRITA 3-Way Integrated Water Filtration System provides three types of water: filtered, cold, and hot. The tap features separate levers or controls for each function.

• فلټر شوي اوبه: Use the dedicated lever (often marked or with a blue indicator) to dispense filtered water.
• Cold & Hot Water: Use the standard mixer lever to dispense unfiltered cold or hot water, just like a conventional kitchen tap.
• Smart Filter Change Indicator: The filter head includes an LED indicator that signals when it's time to replace the filter cartridge. Refer to the maintenance section for details on interpreting the indicator.

Image: The BRITA 3-Way Tap demonstrating the simultaneous dispensing of filtered water from one spout and unfiltered cold/hot water from another, highlighting its versatility.

انځور: نږدې انځور view of the BRITA tap's smart filter change indicator, showing the LED light that signals filter status.

ساتنه

Regular maintenance ensures optimal performance and longevity of your BRITA P1000 system.

د فلټر کارتریج بدلول

The BRITA P1000 filter cartridge should be replaced periodically, typically every 6-12 months, or when the smart filter change indicator signals. The indicator light will change color (e.g., green to yellow to red) to prompt replacement.

1. Turn off the water supply to the filter unit.
2. Twist the old filter cartridge counter-clockwise to remove it from the filter head.
3. Insert the new BRITA P1000 filter cartridge into the filter head and twist clockwise until it clicks into place.
4. Turn the water supply back on and flush the new filter for 3 minutes.
5. Reset the smart filter change indicator according to its specific instructions (usually by pressing and holding a button).

پاکول

Clean the exterior of the tap and filter unit regularly with a soft, damp ټوکر او نرم صابون. د کثافاتو پاکوونکو یا محلولونو څخه ډډه وکړئ چې کولی شي پای ته زیان ورسوي.

د ستونزو حل کول

If you encounter any issues with your BRITA P1000 system, refer to the table below for common problems and solutions:

مشخصات

تضمین او ملاتړ

For warranty information and customer support, please refer to the documentation included with your product or visit the official BRITA webسایټ. د تضمین ادعاوو لپاره د پیرود ثبوت وساتئ.

تاسو هم کولی شئ لیدنه وکړئ BRITA Store on Amazon د نورو محصولاتو او معلوماتو لپاره.