پیژندنه
The COROS Bike Cadence Sensor is designed to help cyclists track their pedaling RPMs (revolutions per minute) to improve pedaling efficiency. This sensor is compatible with both outdoor and indoor rides, including most spin bikes, and pairs seamlessly with bike computers, smartwatches, or smartphones via Bluetooth connectivity.
په بکس کې څه دي
د بسته بندۍ پرانستلو سره، تاسو به لاندې برخې ومومئ:
- COROS Bike Cadence Sensor
- د سینسر غره
- Rubber Bands for mounting
- د چټک پیل لارښود
- د محصول خوندیتوب معلومات
تنظیم او نصب کول
1. د بیټرۍ نصب کول
The COROS Bike Cadence Sensor uses a CR2032 coin cell battery. Ensure the battery is correctly inserted before use. The battery compartment is typically located on the back of the sensor.
۱. د سینسر نصب کول
The sensor is designed for easy installation on your bike's crank arm. Use the provided rubber bands to securely attach the sensor. Position the sensor on the non-drive side crank arm for optimal cadence tracking.
3. د وسایلو سره یوځای کول
The COROS Bike Cadence Sensor connects via Bluetooth. To pair, activate the sensor by rotating the crank arm a few times. Then, open the settings on your compatible bike computer, smartwatch, or smartphone application and search for new Bluetooth devices. Select the COROS Cadence Sensor from the list to establish a connection. The sensor is not compatible with ANT+ devices.
عملیاتي لارښوونې
Once paired, the sensor will automatically begin tracking your pedaling RPMs when you start cycling. This data is transmitted in real-time to your connected device, allowing you to monitor and optimize your pedaling efficiency. The sensor works effectively for both outdoor rides and indoor training sessions, including use with most spin bikes.
ساتنه
د بیټرۍ ژوند او ځای پرځای کول
The CR2032 battery in your COROS Bike Cadence Sensor is designed to last up to 12 months under typical usage conditions. When the battery level is low, your connected device may display a notification. To replace the battery, carefully open the battery compartment, remove the old battery, and insert a new CR2032 battery with the positive (+) side facing up. Ensure the compartment is sealed tightly after replacement.
پاکول او د اوبو مقاومت
The sensor has an IP67 water rating, providing protection against dust and temporary immersion in water. This makes it suitable for all-weather protection and durability. To clean the sensor, wipe it with a damp ټوکر. د سختو کیمیاوي موادو یا کثافاتو موادو کارولو څخه ډډه وکړئ چې وسیله ته زیان رسولی شي.
د ستونزو حل کول
- سینسر نه نښلي: Ensure the sensor has a fresh battery and is properly activated by rotating the crank arm. Check that Bluetooth is enabled on your receiving device and that the sensor is within range.
- ناسم لوستل: Verify that the sensor is securely mounted on the crank arm and is not obstructed. Ensure there are no strong electromagnetic interferences nearby.
- د بیټرۍ په چټکۍ سره وچول: Confirm that the sensor is not left in an active state when not in use. Replace the battery if it is old or if the issue persists.
مشخصات
| برانډ | COROS |
| د ماډل نوم | COROS Bike Cadence Sensor |
| رنګ | تور |
| د سینسر ډول | د کدر سینسر |
| د ارتباط ټیکنالوژي | Bluetooth (Not compatible with ANT+ devices) |
| د نصب کولو ډول | Crank Arm Mount |
| د بیټرۍ ډول | CR2032 Lithium Manganese Dioxide |
| د بیټرۍ ژوند | تر 12 میاشتو پورې |
| د اوبو درجه | IP67 |
| وزن | 11 ګرامه |
| د توکي ابعاد (LxWxH) | 3.94 x 3.94 x 3.94 انچه |
تضمین او ملاتړ
The COROS Bike Cadence Sensor comes with a 1-year manufacturer's warranty. For technical support, warranty claims, or additional product information, please visit the official COROS webسایټ ته مراجعه وکړئ یا مستقیم د دوی د پیرودونکو خدماتو سره اړیکه ونیسئ. د تضمین تصدیق لپاره د پیرود ثبوت وساتئ.
