Neoteck 0-10000 PPM Gas Leak Detector RD710 Instruction Manual

1. پیژندنه

The Neoteck RD710 Gas Leak Detector is designed for rapid and accurate detection of various combustible gases. This device provides audible and visual alarms to alert users to potential gas leaks, ensuring safety in residential, recreational, and industrial environments. Please read this manual thoroughly before operation to ensure correct usage and optimal performance.

د خوندیتوب احتیاطونه

• Always perform zero calibration in a clean air environment (e.g., outdoors) to prevent inaccurate low readings.
• Ensure the device is adequately charged. Low battery can lead to significant measurement inaccuracies.
• وسیله د خورا تودوخې یا رطوبت سره مه ښکاره کوئ.
• د قوي تاثیراتو سره د وسیله له مینځه وړلو یا تابع کولو څخه ډډه وکړئ.

2. د بسته محتويات

ډاډ ترلاسه کړئ چې ټول توکي په کڅوړه کې شتون لري:

• 1x Neoteck RD710 Gas Leak Detector
• 1x د USB ډول-C چارج کیبل
• د 1x ذخیره کڅوړه
• 1x د کارونکي لارښود

Image: Neoteck RD710 Gas Leak Detector with included accessories.

3. د محصول ب Featuresې

3.1 High Sensitivity Sensor

The RD710 features a semiconductor sensor for rapid detection of combustible gases, with a response time of 0.5-3 seconds. It offers a wide detection range of 0-10000 PPM (methane-based) with 1 PPM sensitivity.

Image: Precision sensing technology detecting various combustible gases.

3.2 Visual & Audible Alarms

The device provides real-time gas concentration feedback through a 3-color LED indicator and an intensifying buzzer:

• شین: Low concentration (0-499 PPM)
• ژیړ: Medium concentration (500-1999 PPM) with buzzing
• سور: High concentration (2000 PPM and above) with louder buzzing

Image: Visual and audible alarm system with LED indicators.

3.3 Large LCD Display

A 2.9-inch backlit LCD provides clear, real-time readings of PPM values, battery status, and an analog bar graph for gas concentration, even in low-light conditions.

Image: 2.9-inch large backlit screen for easy reading.

3.4 Rechargeable Battery & Type-C Charging

Equipped with a 1200mAh rechargeable battery, supporting over 3000 charge cycles and up to 16 hours of continuous usage. The device charges via a universal Type-C cable and can operate while charging.

Image: Rechargeable battery with Type-C charging.

3.5 Multi-Gas Detection

The RD710 detects various common combustible gases, including Liquefied Petroleum Gas (LPG), Liquefied Natural Gas (LNG), methane, ethane, propane, butane, and natural gas.

3.6 اضافي دندې

• جوړ شوی فلش لائټ: د ټیټ رڼا شرایطو کې د کارولو لپاره.
• د معلوماتو ساتل: په ښودنه کې اوسنی لوستل کنګل کوي.
• اتومات بریښنا بند: Automatically shuts down after 10 minutes of inactivity to conserve battery.
• د خاموش فعالیت: Allows silencing of the audible alarm.

4. ترتیب کول

4.1 ابتدايي چارج کول

Before first use, fully charge the device using the provided USB Type-C cable and a compatible USB power adapter (not included). The battery indicator on the LCD will show charging status.

۵.۲ بریښنا فعاله او ګرمول

1. د بریښنا تڼۍ فشار او ونیسئ (U) د وسیله د چالانولو لپاره.
2. The device will enter a 30-second warm-up period. The display will count down.

4.3 صفر اندازه کول

After warm-up, perform zero calibration to ensure accurate readings. This must be done in a clean air environment, free from any combustible gases.

1. Take the device to an area with clean air, such as outdoors.
2. Press the "MEAS (Set '0')" button. The device will calibrate to zero.
3. Once calibration is complete, the device is ready for use.

Image: Performing zero calibration in a clean air environment.

5. عملیات

5.1 Gas Detection Procedure

1. After warm-up and zero calibration, slowly move the sensor tip of the detector towards the suspected leak area.
2. Observe the LCD display for PPM readings and the analog bar graph.
3. Listen for the audible alarm and note the color of the LED indicator. The alarm intensity and LED color will change with increasing gas concentration.

5.2 Using Buttons

• Power Button (U): د چالو / بندولو لپاره فشار ورکړئ او ونیسئ.
• MEAS (Set '0') Button: Initiates zero calibration.
• د APO تڼۍ: Toggles the auto power-off function.
• تڼۍ ونیسئ: په ښودنه کې اوسنی لوستل کنګل کوي. د خوشې کولو لپاره بیا فشار ورکړئ.
• تteۍ غږول: Toggles the audible alarm sound on/off.
• د فلش لائټ تڼۍ: جوړ شوی فلش لائټ فعال/بندوي.

6. ساتنه

6.1 د بیټرۍ پاملرنه

• Recharge the device when the low-battery warning appears on the display.
• د بیټرۍ د غوره ژوند لپاره، د بیټرۍ په مکرر ډول په بشپړه توګه چارج کولو څخه ډډه وکړئ.
• If storing the device for an extended period, charge it to approximately 50% and recharge every 3-6 months.

6.2 پاکول

• د وسیلې بهرنۍ برخه د نرم، ډ سره پاک کړئamp ټوکر د کثافاتو پاکوونکي یا محلول مه کاروئ.
• Keep the sensor tip clean and free from dust or debris to ensure accurate detection.

6.3 ذخیره کول

• کله چې کارول نه وي، وسیله په چمتو شوي ذخیره کڅوړه کې وساتئ.
• وسیله په یخ او وچ ځای کې وساتئ، د مستقیم لمر وړانګو او سختې تودوخې څخه لرې.

7. ستونزه حل کول

8. مشخصات

9. تضمین

The Neoteck RD710 Gas Leak Detector comes with an 18-month warranty from the date of purchase. This warranty covers manufacturing defects and material faults under normal use. Please retain your proof of purchase for warranty claims.

10. د پیرودونکي ملاتړ

For technical assistance, troubleshooting, or warranty inquiries, please contact Neoteck customer support through the retailer where the product was purchased or visit the official Neoteck webد اړیکو معلوماتو لپاره سایټ.