د بلورمز A12S فولډ ویو کیمره

مشخصات:

• نښه: بلورامز
• ملاتړ شوي پلیټ فارمونه: iOS، Android
• ارتباط: وای فای، بلوتوث
• د بریښنا رسول: د بریښنا اډاپټر
• د وائی فای مطابقت: 2.4G وائی فای

د محصول کارولو لارښوونې

د بلورام ایپ ډاونلوډ کړئ
Download the Blurams App from the respective app store based on your device’s operating system.

نصب او پیوستون

Enabling Access for Blurams App:

1. په خپل تلیفون کې تنظیمات خلاص کړئ.
2. ایپس (یا د اپلیکیشن مدیریت) ته لاړ شئ.
3. د اپلیکیشن لیست څخه بلورمز ومومئ او غوره کړئ.
4. Enable permissions for Bluetooth, Local Network, and Location.
5. خپل تلیفون وائی فای سره وصل کړئ.

Adding a Device via QR Code:

1. Connect the device to power and wait for the prompt or red flashing light.
2. Ensure your router is connected to the internet and on 2.4G Wi-Fi.
3. وسیله د روټر سره نږدې کېږدئ.
4. اپلیکیشن پرانیزئ، د + آیکون باندې کلیک وکړئ، او د QR کوډ له لارې اضافه کول غوره کړئ.
5. Enter Wi-Fi details and hold the QR code in front of the device’s camera.
6. Follow on-screen instructions to complete the connection process.

Adding a Device via Bluetooth:
Instructions for adding a device via Bluetooth are not provided in this section of the user manual.

*په یوه کلیک سره لاسرسی: په ساده ډول هغه برخه غوره کړئ چې په اتوماتيک ډول یې پاڼې ته واستول شي.

د بلورام ایپ ډاونلوډ کړئ

موږ ومومئ
ټیلیفون: +1 (855) 917 4591
(Mon – Fri 08:00 AM – 05:00 PM Pacific Time)
د ملاتړ بریښنالیک: support@blurams.com

د کیمرې پیژندنه

Get to know Your Camera

نصب او پیوستون

Enabling Access for blurams App
To ensure a smooth setup and connection, please grant the necessary permissions for the blurams app by following these steps:

1. Open “Settings” on your phone.
2. Navigate to “Apps“ (or App Management).
3. Find and select “Blurams” from the app list.
4. Enable the following permissions:
   • بلوتوث: Required for device pairing.
   • محلي شبکه: Ensures stable communication with your Blurams device.
   • ځای: Helps detect and connect to your device properly.
5. Connect the phone to Wi-Fi.

Please follow the steps below to enable access:

د iOS لپاره:

وای فای 

ځای

بلوتوث

د Android لپاره:

ځای 

بلوتوث 

وای فای 

یوځل چې دا اجازې فعالې شي، تاسو کولی شئ په اسانۍ سره د خپل بلورمز وسیله اضافه کولو ته دوام ورکړئ.

Adding a Device via QR Code
د وسیله اضافه کولو دمخه، مهرباني وکړئ لاندې ډاډ ترلاسه کړئ:

1. After connecting the device to power, wait for about 30 seconds to 1 minute. You should hear a voice prompt saying “Waiting for connection” or see the indicator light flashing red.
   If you don’t hear the prompt or see the red flashing light after a while,you can try pressing and holding the RESET button to reboot the device into pairing mode.
   د بریښنا رسولو ستونزو څخه د مخنیوي لپاره په کڅوړه کې چمتو شوي بریښنا اډاپټر او کیبل کارول سپارښتنه کیږي.
2. Ensure that your router is connected to the internet. Connect your phone to the same Wi-Fi network and open a web براوزر وګورئ ترڅو وګورئ چې اړیکه په سمه توګه کار کوي.
3. Some device models do not support 5G Wi-Fi. Ensure that your router’s 2.4G Wi-Fi is enabled. You can log in to your router’s control panel to enable 2.4G Wi-Fi or contact your router provider for assistance. (Most routers come with 2.4G Wi-Fi enabled by default.)
4. وسیله د روټر سره نږدې کېږدئ.

Steps to add the device via QR code: 

1. وسیله د بریښنا سره وصل کړئ.
2. Open the app, go to the device list, and tap the “+” icon to add a device.
3. Select “Add via QR Code”.
4. Wait for the device to prompt “Waiting for connection”. If no prompt is heard, press and hold the RESET button until you hear the beep.
5. د وای فای نوم او پټنوم دننه کړئ.
6. Hold the QR code displayed on your phone in front of the device’s camera at a distance of 10cm to 30cm until you hear the beep.
7. After scanning the QR code, the device will start connecting. Follow the on-screen instructions to complete the process.

Adding a Device via Bluetooth 

د وسیله اضافه کولو دمخه، مهرباني وکړئ لاندې ډاډ ترلاسه کړئ:

The app needs to access your phone’s current Wi-Fi name to verify the connection to the device’s Wi-Fi hotspot. Due to system restrictions, location permission is required. Please grant location access when prompted.

If location permission was denied, follow these steps to re-enable it:

• د iOS لپاره: Go to Settings > Blurams > Location > Select “While Using the App”
• د Android لپاره: Go to Settings > Apps > Blurams > Permissions > Turn on “Location”

یادونه: iOS users must grant local network permission to the app to receive device signals.

Steps to add the device via Bluetooth:

1. Plug in the power cable to your device.
2. In the device list on the app, tap the “+” icon to add a new device.
3. Press and hold the RESET button on the device until the indicator light starts flashing red or you hear a beep sound—this means the device has entered pairing mode.
4. Turn on Bluetooth on your phone and select the Bluetooth signal detected by the app. The signal will appear as CAM_xxxxxxx.
   You can also scan the QR code or manually enter the device serial number to pair.
5.  Connect to Wi-Fi: After Bluetooth pairing, choose the Wi-Fi network you want the device to connect to and enter the Wi-Fi password.
   Tap “Next”, and the device will attempt to connect to Wi-Fi and the server to complete the setup.

یادونه: 

• Bluetooth Compatibility: Only specific models support Bluetooth pairing. Please check if your device is compatible before proceeding.
• Bluetooth Signal: Make sure your phone’s Bluetooth is enabled and ready to detect the device.
• Wi-Fi Network: After Bluetooth pairing, the device still needs to connect to Wi-Fi network.

Device Offline Issues
که چیرې وسیله له شبکې سره وصل نشي یا آفلاین ښکاري، لاندې وګورئ:

1. Ensure the router is connected to the internet. Test by connecting your phone to the same Wi-Fi and browsing a frequently-used webسایټ
2. Some cameras only support 2.4G Wi-Fi. Check if your router has 2.4G Wi-Fi enabled via the router settings or by contacting your provider.
3. Ensure the correct Wi-Fi name and password are entered. If the router’s name or password has changed, re-add the device to reconnect.
4. Place the device close to the router, avoiding physical obstructions.
5. Routers have a limit on the number of connected devices. Try disconnecting some devices before reconnecting your device.

Changing the Device’s Network Connection
که تاسو وسیله نوي ځای ته انتقال کړئ یا خپل روټر بدل کړئ، د وای فای ترتیباتو تازه کولو لپاره دا ګامونه تعقیب کړئ:

• که وسیله آفلاین وي:
  The only way to update Wi-Fi settings is to re-add the device. You can access this option through “Troubleshooting”, and “Update Wi-Fi” in device settings,or by adding the device again.
• که وسیله آنلاین وي:
  Go to Device Settings > Network Information > Update Wi-Fi.
  The device will scan for available networks. Select the desired Wi-Fi and enter the password to connect.

Alternatively, you can re-add the device to change the Wi-Fi settings.

د وسیله ړنګول 

• If you need to add the device to another account or return it, please delete it from your account first. You can do this by navigating to the device settings page and selecting the “Remove Device” option.
• If the device is linked to a cloud service, deleting it will automatically unbind the cloud service from the device. However, the cloud service will still be available under your account and can be reassigned to another device.

د کلاوډ خدمتونه

د کلاوډ ذخیره کولو خدمت

خدمت پای ته ورسیدview
د کلاوډ ذخیره کولو خدمت وسیله ته اجازه ورکوي چې ثبت شوي ویډیوګانې په خوندي ډول په کلاوډ کې خوندي کړي. دا اضافي ځانګړتیاوې هم وړاندې کوي لکه بشپړ ویډیو ثبت کول، چټک پلے بیک، او ویډیو شریکول. کلاوډ ذخیره د بانک-ګریډ AES256 کوډ کولو لخوا خوندي شوې او د امنیت پنځه پرتونو ته غاړه ایږدي، پشمول د پرمختللي ټرمینل امنیت، خوندي ډیټا لیږد، کلاوډ ذخیره کولو محافظت، د کیریر-ګریډ ډیټا مرکز مدیریت، او نړیوال امنیت تصدیق.

By subscribing to the cloud service, you will gain access to the following features:

• Continuous video recording stored on the cloud allows you to review all historical footagاو هر وخت، هر ځای.
• Fast playback at up to 4x speed improves the efficiency of reviewثبت شوي ویډیوګانې خپروي.
• Direct video sharing from the cloud to third-party social platforms, so you can share special moments with friends.

Cloud Service Categories
Cloud service plans are classified based on two factors:

• د ذخیره کولو موده
  This refers to the maximum number of days a video is stored on the cloud before being automatically deleted.
  د مثال لپارهampاو، که تاسو د 7 ورځو کلاوډ ذخیره کولو پلان کې ګډون وکړئ، نو هره ثبت شوې ویډیو به تر 7 ورځو پورې زیرمه شي مخکې لدې چې نوي اپلوډونه یې ځای په ځای شي.
• Subscription Validity
  This refers to how long the cloud service remains active.
  A monthly plan lasts one month, while an annual plan lasts one year.
  For instance, if a user purchases a monthly plan on October 3rd, the service will be valid until November 2nd.
  During the subscription period, older videos exceeding the storage duration will be automatically deleted to make room for new recordings.

Differences Between Cloud Storage and SD Card Storage 

د کلاوډ ذخیره	د SD کارت ذخیره
د معلوماتو دایمي ذخیره کول	نه جبرانېدونکی زیان یا زیان
Unlimited storage with multiple choices	Limited storage
Conveniently check the recordings on the App	/
Downloading and sharing recordings	/
په څو سرعتونو کې ګړندی پلې بیک	/

Purchased Cloud Service Not Activated
په نورمال ډول، د کلاوډ خدمت په بریالیتوب سره پیرودلو وروسته، دا به په اتوماتيک ډول وسیله سره وصل شي او په 5 دقیقو کې به فعال شي.
که تاسو د دې خدمت لپاره پیسې ورکړې وي مګر په کلاوډ کې ثبت شوي ویډیوګانې نشئ لیدلی، نو د ستونزو حل کولو لپاره دا ګامونه تعقیب کړئ:

• Check if the cloud service is bound to your device
  Go to My Account → Manage Plans to view all active cloud service subscriptions.
  If your newly purchased plan is not bound to a device, manually bind it before use.
• Ensure cloud video recording is enabled
  Navigate to Device Settings → Storage Settings and confirm that “Cloud Video Recording” is turned on.
  If this option is disabled, the platform will not save any uploaded video files.
• د پیرودونکي ملاتړ سره اړیکه ونیسئ
  If the issue persists after checking the above steps, provide the device’s MAC address along with a screenshot of your successful payment (PayPal, iOS, etc.) and send it to our support team. Our professional customer service representatives will assist you.

How to Purchase Cloud Service
You can purchase a cloud storage plan by selecting the “” icon below the device card on the home screen of the app. Payment options include PayPal and credit cards.

یادونه:
Each cloud service plan applies to only one device at a time. If you have multiple devices under one account, you must purchase separate cloud service plans for each device as needed.

The Refund for Cloud Service
Since cloud storage is a virtual service, once activated, it cannot be canceled or refunded. However, if you encounter any issues while using the service, you may contact our customer support team for further assistance.
د ملاتړ بریښنالیک: support@blurams.com

د مصنوعي ذهانت خدمتونه
Blurams currently offers six AI-powered features, which must be purchased separately for activation.

The supported features include:

• Abnormal Image Detection
• د پالتو کشف
• د کورنۍ پاملرنه
• د بسته بندۍ کشف
• Family Member Management
• د وسایطو کشف

اوس مهال، د مصنوعي ذهانت خدمات یوازې د واحد لینز PTZ کیمرې او بهرنۍ گنبد کیمرې لپاره شتون لري. نور ماډلونه، لکه دوه ګونی لینز PTZ کیمرې، دوه ګونی لینز گنبد کیمرې، او 4G وسایل، لا تر اوسه ملاتړ شوي ندي مګر په راتلونکو تازه معلوماتو کې به اضافه شي.

1. Abnormal Image Detection
   The system captures an image daily and analyzes it using intelligent algorithms to detect anomalies such as blurriness, color distortion, snowflakes, stripes, or obstructions.
   تاسو کولی شئ view daily inspection reports in Me → Image Anomaly Patrol → “Inspection Report” during the service period.
2. د پالتو کشف
   کله چې یوه غیر معمولي پیښه وموندل شي، سیسټم به د foo تحلیل وکړيtage to identify pets (mainly cats and dogs).
   If a pet is detected, the system will categorize the event under the “Pets” album.
   یادونه:
   This feature requires an active cloud storage subscription to function.
3. Family Care+
   که چیرې په ټاکل شوي وخت کې هیڅ انساني فعالیت ونه موندل شي، نو سیسټم به اړوند کاروونکو ته د فشار خبرتیاوې او بریښنالیک خبرتیاوې واستوي.
4. د بسته بندۍ کشف
   که چیرې د کیمرې دننه یو بسته وموندل شي view, the system will send push
   notifications to the user to prevent package theft.
5. د وسایطو کشف
   سیسټم د foo تحلیل کويtage to detect vehicles in the scene.
   This feature is particularly useful for nighttime garage monitoring, with instant push notifications for any detected activity.
6. Smart Voice Reminder
   په مخکې ټاکل شویو وختونو کې، دا وسیله کولی شي دودیز غږیز پیغامونه د یادونې په توګه خپاره کړي. کاروونکي کولی شي دودیز غږیز خبرتیاوې ثبت کړي، د تکرار فریکونسۍ تنظیم کړي، او د دوی اړتیاو پراساس د پلې بیک حالتونه تنظیم کړي.

د هارډویر ترتیبات

Video Display is Upside Down
که ستاسو په تلیفون کې د ویډیو فیډ برعکس ښکاري، نو دا احتمال لري چې د وسیلې نصبولو له امله وي چې پورته یې ښکته لور ته مخامخ وي. د دې د سمولو لپاره، "ترتیبات" پاڼې ته لاړ شئ او د ویډیو سمت تنظیم کولو لپاره "د انځور څرخولو" اختیار فعال کړئ.

Video Display is in Black and White
The device automatically switches to night vision mode based on ambient lighting conditions. When night vision mode is activated, the infrared light turns on, causing the video feed to appear in black and white. This ensures clear visibility in low-light environments.

د دې ترتیب تنظیمولو لپاره:

د وسیلې "ترتیب" پاڼې ته لاړ شئ او د "شپې لید" اختیار په اتوماتیک یا بند کې تنظیم کړئ.

که چیرې ویډیو د کافي رڼا سره سره تور او سپین پاتې شي، نو هڅه وکړئ چې وسیله بیا پیل کړئ.

Video Quality is Not Clear
If the live video feed appears blurry or unclear, follow these steps to troubleshoot:

• Ensure you have removed the protective film from the camera lens and clean the lens to maintain clarity.
• Navigate to the device playback page and switch the video quality to HD mode.

یادونه:
HD mode requires a higher upload speed on the device and higher download bandwidth on your phone.

No Push Notifications
If the device detects an event (such as motion or sound detection) but push notifications are not received, check the following:

• Ensure your phone is connected to the internet.
• Verify that push notifications are enabled for the app.

To enable push notifications:

• د Android وسیلو لپاره:
  1. Open the “Settings app” on your phone.
  2. Tap “Notifications”.
  3. Select the app and turn on “Allow Notifications”.
     یادونه:
     Settings may vary depending on your phone model. Contact your device manufacturer for details.
• د iOS وسیلو لپاره:
  1. په خپل تلیفون کې د ترتیباتو ایپ خلاص کړئ.
  2. Select the app.
  3. Tap Notifications and enable Allow Notifications.

If notifications are still not received, check the app’s notification settings:

1. Turn on “Allow Notifications”.
2. Enable the specific event types you want to receive notifications for (e.g., motion detection, sound detection).
3. Verify if the “Stop notification time” is set.
4. Check if the “Notification frequency“ is set too long.

د SD کارت ذخیره

SD Card Not Detected
If the SD card is inserted but the device does not recognize it, follow these steps:

1. Once a TF (microSD) card is inserted into the camera, the device will display storage details on the screen under normal conditions—such as the total capacity and percentage کارول.
   The displayed capacity may appear slightly lower than the capacity marked on the card. This discrepancy is due to differences in calculation methods between the storage card and the device, as well as the space occupied by formatting and system files. دا یوه عادي پیښه ده او د کارت په اصلي فعالیت اغیزه نه کوي.
2. If the SD card is not detected:
   • Insert the SD card into a computer to check if it can be read and written normally.
   • Power off the device before inserting the SD card.
   • Ensure the SD card is formatted to FAT32 (the device only supports FAT32 format).
   • The device supports SD cards with a capacity of 8GB to 128GB.

نشي کولی View د SD کارت څخه پلې بیک
دا وسیله د کلاوډ ثبتولو او د SD کارت ثبتولو ملاتړ کوي. په ډیفالټ ډول، مهال ویش د کلاوډ ثبتونه ښیې. که چیرې وسیله آفلاین شي، نو ممکن د SD کارت ثبتونه ونه ښودل شي.

To switch to SD card recording mode:

Go to device Settings → Storage → Recording Mode and select one of the following options:

• No Recording – The device will not record to the SD card.
• Event Recording – The device will record only when an event occurs.
• Continuous Recording – The device will continuously record as long as an SD card is inserted, even when offline.

یادونه:
This mode increases read/write frequency, which may shorten the SD card lifespan.

Days of SD Card Storage
The storage duration depends on video bitrate and resolution.
د مثال لپارهample, with Full HD resolution (1920×1080, 1.5Mbps bitrate):

A full day of continuous recording requires approximately 15.8GB of storage. A 128GB SD card can store about 8.1 days of continuous recording.

• For HD resolution (1Mbps bitrate):
  A 128GB SD card can store approximately 12.2 days of continuous recording.
• For SD resolution (512Kbps bitrate):
  A 128GB SD card can store approximately 24.3 days of continuous recording. If event recording mode is enabled, storage duration will be extended. When the SD card is full, the oldest recordings will be automatically overwritten.

حساب

د ننوتلو ناکامي
د ننوتلو ناکامي ممکن د مختلفو دلیلونو له امله رامنځته شي. لومړی، وګورئ چې ستاسو تلیفون یو باثباته انټرنیټ اتصال لري د لاسرسي هڅه کولو سره webسایټ د براوزر له لارې.

Common login error messages and solutions:

• “The Account does not exist.”
  Ensure that the account was previously registered. If not, register a new account. Double-check that the entered account details are correct.
• “User login password error!”
  Re-enter the password and use the eye icon to check your input.
  If unsuccessful, click Forgot Password to reset your login credentials.
• “The account has been locked.”
  Multiple incorrect login attempts will temporarily lock the account for 15 minutes as a security measure. Please wait before trying again.
• “The account not activated.”
  The account has not been activated. Try registering again.

که ستونزه دوام وکړي، اپلیکیشن وروستي نسخې ته تازه کړئ، خپل تلیفون بیا پیل کړئ، یا اپلیکیشن بیا نصب کړئ. که ستونزه لاهم حل نه شي، د پیرودونکو ملاتړ سره اړیکه ونیسئ.

پټنوم هیر شوی
If you forget your password, click “Forgot Password“ on the login page to reset it.

د پاسورډ بدلولو څرنګوالی

• If you remember your password, log in and navigate to Me → Settings → Account → Change Password.
• If you forget your password, reset it via the Forgot Password option.

د پټنوم اړتیاوې:

1. Must be 6–26 characters long.
2. Must include uppercase letters, lowercase letters, and numbers.

نور ځانګړتیاوې

بنسټیز کارونه

1. د وسایلو لیست
2. ژوندی View پاڼه

د وسیلې ترتیبات 

• د وسیلې ځواک
  Temporarily turn the device off (remember to turn it back on).
• Scheduled Power Off
  Set a schedule for turning the device on and off.
• Push Notification Settings:
  • د حرکت کشف
  • د غږ کشف
  • د انسان کشف
  • Abnormal Image Inspection
  • د بسته بندۍ کشف
  • د پالتو کشف
  • د وسایطو کشف
  • Notification Stop Schedule
  • Notification Frequency
• BluramsGuard Plan:
  • د کورنۍ پاملرنه
  • Time-lapse Snapshot
  • Abnormal Image Inspection
  • د بسته بندۍ کشف
  • د پالتو کشف
  • د وسایطو کشف
  • سمارټ خبرتیاوې
• د ویډیو ذخیره کول:
  • د کلاوډ ذخیره
    • Cloud Storage On/Off
    • Delete Cloud Recordings
  • د SD کارت ذخیره
    • د کارت حالت
    • د کارت ظرفیت
    • د ثبت کولو حالت
    • د ثبتولو کیفیت
    • د SD کارت بڼه
• Video Quality & Bandwidth:
  • Adjust Bitrate
  • ریزولوشن تنظیم کړئ.
• انځور وګرځوئ
  Corrects video orientation for inverted installations.
• د وسیلې شریکول
  Allows multiple users to access the camera feed.
• مایکروفون
  Disabling this removes audio from live and recorded videos.
• مهال ویشamp واټر مارک
  Embeds the date/time in the video feed.
• د حرکت تعقیب
  Tracks detected movement within the video frame.
• د الارم خبرتیا
  Triggers an audible alarm when anomalies are detected.
• د شبکې معلومات:
  • د وای فای نوم
  • د وائی فای سیګنال ځواک
  • Update Wi-Fi
• Device Information (Screenshots/Pictures provided for troubleshooting):
  • د فرم ویئر نسخه
  • ماډل
  • د MAC پته
  • د وسیلې ID

په مکرر ډول پوښتل شوي پوښتنې

پوښتنه: زه څنګه کولی شم خپل بلورمز وسیله بیا تنظیم کړم؟
A: You can press and hold the RESET button on the device to reboot it into pairing mode.

پوښتنه: زه باید څه وکړم که چیرې وسیله د وای فای سره وصل نشي؟
A: Make sure your router is on 2.4G Wi-Fi, and the device is placed close to the router. Ensure proper power supply and follow the app’s instructions carefully.

اسناد / سرچینې

د بلورمز A12S فولډ ویو کیمره [pdf] د کارونکي لارښود A12S، A12S فولډ ویو کیمره، فولډ ویو کیمره، کیمره

حوالې

• د کارن لارښود