Elecrow ESP32 AI Camera Development Board Vision Sensor Board

د وسیلې برخې

1. د سپیک سرۍ
2. د RGB رڼا
3. ال تڼۍ
4. MIC
5. د UART سرۍ
6. د TF کارت سلاټ
7. کیمره
8. د مرستې ر Lightا
9. د بیا تنظیم تڼۍ
10. سپیکر
11. د ډول-C بندر
12. د بریښنا رڼا
13. د بیټرۍ رڼا
14. BAT Header

ګړندي لارښود

• Al Button:
  • In “Al Voice” mode, click to toggle the “Standby/Listening” status.
• کیلي بیا تنظیم کړئ:
  • Single-click to reboot after firmware flashing failure or device malfunction.
• د بریښنا ر Lightا:
  • The red LED is on steadily when powered.
• د بیټرۍ رڼا:
  • When powered by the battery, the red light stays on while charging, and the green light stays on when fully charged.

د شبکې جوړه کول

1. Plug in the Type-C cable to power on.
2. If you want to use the “Al Online” feature, you need to network pair and register the Al Agent first.
3. Open your phone/computer’s WiFi list, click on “Al_Camera_XXXX” to enter WiFi pairing mode.
   • که د webpage does not open automatically, please visit 192.168.4.1 in your browser.
4. Choose an available 2.4GHz WiFi, enter the WiFi password, and click “Save Configuration”.
   • You can see your Wifi in “WiFi Network”.
   • یادونه: If you want to clear your network, open the “Settings” app, then open the “Configure Network”, and click “RECONFIGURE”.
5. Open the “Al Online” app, then open a browser and go to https://portal.thinknode.cc/ to access the Al Hub interface. If this is your first time logging in, you need to click the “Create Account” button to create an account.
6. After the account is successfully created and logged in, you will receive a 5000-point reward.
7. Click the “Al Hub” button to start “Add Agent”.
8. Click “Add Agent” and give your Al Agent a name.
9. Click “Manage devices (0)”, then click “Add Device”, enter the verification code, and confirm.
10. After completing “Add Device”, you can configure the character.
11. If you want to browse “Historical conversations”, you need to first enable “Local Short-term Memory” and save.
    • یادونه: If your 5000 points are used up, you need to click “Recharge” to purchase a plan that will allow you to regain points.

اصلي مشخصات

• د محصول نوم: Al Camera Module
• اصلي کنټرولر ESP32-S3R8
• ښودل 1.83-inch TFT-LCD Touch Screen
• پکسلز 2 MP
• بېسیم WiFi & Bluetooth 5.0
• فلش 16MB
• د TF کارت سلاټ تر 128GB پورې ملاتړ کوي
• انٹرفیس UART Interface. IC Pad
• داخلول 5V/1A
• ابعاد 56.05*44.5*18.6mm
• د عملیاتي حرارت درجه له 20 درجو څخه تر 65 درجو پورې

اسناد / سرچینې

Elecrow ESP32 AI Camera Development Board Vision Sensor Board [pdf] د کارونکي لارښود ESP32 AI Camera Development Board Vision Sensor Board, ESP32, AI Camera Development Board Vision Sensor Board, AI Camera Development Board Vision Sensor Board, AI Camera Development Board, Camera Development Board, Vision Sensor Board, Sensor Board

حوالې

• د کارن لارښود