Godox X1R-S 2.4G TTL Wireless Flash Receiver for Sony Cameras

1. پیژندنه

The Godox X1R-S is a 2.4G wireless flash receiver designed for Sony DSLR cameras, offering TTL (Through-The-Lens) autoflash compatibility and high-speed sync capabilities. This receiver integrates seamlessly into the Godox wireless X system, allowing for remote control of compatible flashes and studio strobes. This manual provides detailed instructions for setting up, operating, and maintaining your X1R-S receiver.

2. محصول ختم شوview

کلیدي ځانګړتیاوې:

• مطابقت: Designed for Sony DSLR cameras, supporting TTL Autoflash.
• بې سیم سیسټم: Built-in 2.4G wireless transmission for reliable communication up to 100 meters.
• فلش موډونه: Supports TTL Autoflash, Manual Flash, and Multi-Flash modes.
• Sync Functions: 1/8000s High-Speed Sync (HSS), Flash Exposure Compensation (FEC), Flash Exposure Lock (FEL), Modeling Flash.
• کنټرول: Wireless remote control and grouping system with 5 groups (A/B/C/D/E) in GR mode and 3 groups (A/B/C) in Ratio mode, across 32 channels.
• د شټر خوشې کول: Functions as a wireless shutter release via its 2.5mm sync port.
• ښکاره کول: Wide LCD panel with backlight for easy operation.
• ځواک: Uses 2x AA batteries.
• فرم ویئر: د فرم ویئر اپ گریڈ لپاره مایکرو USB پورټ.

د اجزاوو پیژندنه:

شکل 1: مخکی view of the Godox X1R-S receiver, showing the hot shoe mount and 'TEST' button.

شکل 2: پورته view of the Godox X1R-S receiver, highlighting the LCD screen and channel/group buttons.

شکل 3: اړخ view of the Godox X1R-S receiver, showing the Micro USB port and 2.5mm sync port.

3. ترتیب کول

3.1 د بیټرۍ نصب کول

1. Slide open the battery compartment cover located on the side of the receiver.
2. دوه (2) AA بیټرۍ دننه کړئ، د سم قطبیت ډاډ ترلاسه کړئ (+/-).
3. د بیټرۍ کمپارټ پوښ په خوندي ډول وتړئ.

Figure 4: The battery compartment of the X1R-S receiver, showing two AA batteries being inserted.

۴.۲ د رسیدونکي نصب کول

1. Attach the X1R-S receiver to the hot shoe of your Sony camera.
2. Secure the receiver by tightening the locking wheel.
3. Mount your compatible flash unit onto the hot shoe of the X1R-S receiver.

شکل 5: لاندې view of the X1R-S receiver, showing the hot shoe mount for camera attachment.

3.3 Connecting to Studio Strobes/Other Devices

For studio strobes or other devices requiring a sync connection, use the provided 2.5mm sync cable. Connect one end to the 2.5mm sync port on the X1R-S receiver and the other end to the sync port of your studio strobe or device.

Figure 6: The X1R-S receiver shown with various sync cables for connecting to different flash units.

۴.۱ د چینل او ګروپ ترتیبات

Ensure the channel and group settings on your X1R-S receiver match those on your Godox X-series transmitter (sold separately). This ensures proper communication between the units.

• Use the 'CH' button to select the desired channel (1-32).
• Use the 'GR' button to select the desired group (A/B/C/D/E).

4. عملیاتي لارښوونې

۸ پاور آن/بند

Slide the ON/OFF switch located on the side of the receiver to power it on or off.

۶.۵ ټیسټ فلش

Press the 'TEST' button on the receiver to manually trigger the connected flash unit. The 'STATUS' indicator will light up to confirm the flash has fired.

۴.۲ د بېسیم فلش کنټرول

Once the receiver is properly set up and paired with a compatible Godox X-series transmitter, the flash connected to the X1R-S will fire in sync with your camera's shutter release, according to the settings configured on the transmitter. This includes TTL, Manual, Multi-flash, HSS, FEC, and FEL functions.

۴.۶ د بېسیم شټر خوشې کول

The X1R-S receiver can also function as a wireless shutter release for your camera. Connect the receiver to your camera's shutter release port using an appropriate 2.5mm sync cable. The shutter release function is typically controlled via the transmitter.

4.5 LCD پینل

The wide LCD panel displays current settings such as channel, group, flash mode, and battery status. The backlight can be toggled on/off for visibility in various lighting conditions.

5. ساتنه

5.1 د بیټرۍ بدلول

Replace the AA batteries when the battery indicator on the LCD panel shows low power to ensure uninterrupted operation.

5.2 د فرم ویئر لوړول

The X1R-S receiver features a Micro USB port for firmware upgrades. Visit the official Godox webد غوره فعالیت او مطابقت ډاډ ترلاسه کولو لپاره د وروستي فرم ویئر او لارښوونو لپاره سایټ.

6. ستونزه حل کول

• فلش نه چلېږي:
  • Check if the receiver is powered on and has fresh batteries.
  • Ensure the channel and group settings on the receiver match the transmitter.
  • Verify that the flash unit is properly mounted and powered on.
  • Check the connection of the 2.5mm sync cable if using a studio strobe.
  • Test the flash manually using the 'TEST' button on the receiver.
• Inconsistent firing:
  • Ensure the receiver and transmitter are within the effective operating range (up to 100m).
  • Check for potential interference from other 2.4G wireless devices. Try changing channels.
  • Verify battery levels in both the receiver and the connected flash unit.
• TTL/HSS not working:
  • Confirm that both your camera and flash unit support TTL/HSS.
  • Ensure the receiver is securely mounted on the camera's hot shoe and the flash is securely mounted on the receiver.
  • Check the settings on your transmitter to ensure TTL/HSS is enabled.

7. مشخصات

۸. د محصول رسمي ویډیوګانې

Godox CT-16 Flash Trigger Kit Operation

Godox CT-16 Wireless Flash Trigger

Godox X3 Trigger Operation Tutorial

9. تضمین او ملاتړ

د تضمین معلوماتو، تخنیکي ملاتړ، یا خدماتو پوښتنو لپاره، مهرباني وکړئ رسمي ګوډوکس ته مراجعه وکړئ webسایټ یا خپل مجاز پلورونکي سره اړیکه ونیسئ. د تضمین ځانګړي شرایط ممکن د سیمې او پرچون پلورونکي له مخې توپیر ولري.